FireCADCalc

Refinery and petrochemical calculators

Fuel gas and fuel oil firing: stoichiometry from the gas analysis, efficiency by the stack-loss method, flue gas properties for convection sections, acid dew point for cold-end metal temperatures, and steam system balances.

Units and General Engineering › Maths and geometry 8

Instrumentation and Control › Control loops 15

Instrumentation and Control › Vibration and noise 3

Civil and Structural › Steel structures 6

Chemical and Process › Separation 41

Boilers and Power Plant › HRSG and waste heat recovery 11

Chemical and Process › Physical properties 16

Environmental › Air pollution 14

Civil and Structural › Soil and geotechnical 4

Chemical and Process › Process safety 18

Boilers and Power Plant › Combustion and fuels 33

Chemical and Process › Reactors 21

Chemical and Process › Unit operations 31

Environmental › Wastewater 28

Mechanical › Compressors 8

HVAC and Refrigeration › Ducts 3

Instrumentation and Control › Analysers 9

Chemical and Process › Oil and gas 21

HVAC and Refrigeration › Chillers and cooling 17

Chemical and Process › Process heat exchangers 11

Mechanical › Fluid mechanics 34

Mechanical › Heat transfer 36

Chemical and Process › Solutions and concentrations 10

Instrumentation and Control › Pressure and level 9

Materials and Metallurgy › Material properties 13

Units and General Engineering › Engineering economics 3

HVAC and Refrigeration › Cooling and heating load 8

Materials and Metallurgy › Welding 7

Materials and Metallurgy › Heat treatment 4

Materials and Metallurgy › Corrosion 14

Boilers and Power Plant › Turbines and cycles 6

Chemical and Process › Gas mixtures 9

Civil and Structural › Concrete 3

Boilers and Power Plant › Condensers and cooling towers 7

Instrumentation and Control › Control valves 10

Civil and Structural › Surveying 4

Instrumentation and Control › Signals and calibration 4

HVAC and Refrigeration › Psychrometry 2

Instrumentation and Control › Flow measurement 17

Boilers and Power Plant › Plant performance 1

Civil and Structural › Water and hydraulics 8

Boilers and Power Plant › Steam and water 3

Boilers and Power Plant › Fuel and ash handling 2

Mechanical › Piping 11

Boilers and Power Plant › Emissions and stacks 2

Chemical and Process › Mass and energy balance 4

HVAC and Refrigeration › Refrigeration cycles 1

Mechanical › Tanks and vessels 3

Civil and Structural › Foundations 3

Instrumentation and Control › Temperature 12

Chemical and Process › Bioprocess 1

Mechanical › Pumps 14

Boilers and Power Plant › Furnace and heating surfaces 1

Units and General Engineering › Unit conversions 1

Boilers and Power Plant › Thermic fluid heaters 8

More industries: Thermal power plantProcess steam and utilitiesSugar mill and cogenerationDistillery and ethanolChemical and fertiliserThermic fluid heatingPulp and paperFood, dairy and textile

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.