FireCADCalc

Packed Height from HETP and Transfer Units

HETP from the gas-phase transfer unit height and the stripping factor λ, and the packed height for a given number of theoretical stages (Perry's Eq. 13-58).

Distillery and ethanolRefinery and petrochemicalChemical and fertiliser

Inputs

Examples: HOG 0.5 m, λ 1.2, 10 stagesλ 0.6

Results

Height equivalent to a theoretical plate0.45580m
Packed height4.5580m
Overall gas transfer units9.1161

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: HOG 0.5 m, λ 1.2, 10 stages. The inputs, in the units selected above:

InputValue
Height of an overall gas transfer unit0.50000 m
Stripping factor mV/L1.2000 -
Theoretical stages10.000 -

Applying the formula below gives:

ResultValue
Height equivalent to a theoretical plate0.45580 m
Packed height4.5580 m
Overall gas transfer units9.1161

Open this example in the calculator and change any input.

Formula

\(HETP = H_{OG}\frac{\ln\lambda}{\lambda - 1}, \quad Z = N \cdot HETP\)

Variables

Symbol Meaning SI unit
\(H_{OG}\) Height of an overall gas transfer unit m
\(\lambda\) Stripping factor mV/L -
\(N\) Theoretical stages -
\(HETP\) Height equivalent to a theoretical plate m
\(Z\) Packed height m
\(N_{OG}\) Overall gas transfer units -

Method and standards

Perry's Eq. (13-58).

Where it is used

  • Packed distillation and absorption columns.

Common mistakes

  • Using HETP from another system.
  • No distributor margin.

Assumptions and limits

  • Straight equilibrium and operating lines.

References

  • Perry's Chemical Engineers' Handbook
  • 9th ed. (McGraw-Hill, 2019)
  • sec. 13 (distillation)
  • Eq. (13-58)

Questions and answers

When is HETP equal to H_OG?

When the operating and equilibrium lines are parallel (λ = 1).

What HETP is typical?

0.3–0.6 m for random packings, 0.2–0.5 m for structured packings.

Why add margin?

Liquid maldistribution raises the effective HETP; add 20–40 %.

Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.