Worked example
Example: Sub-cooled feed. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Feed enthalpy | 150.00 kJ/kg |
| Saturated liquid enthalpy at feed-plate pressure | 200.00 kJ/kg |
| Saturated vapour enthalpy | 1,000.0 kJ/kg |
Applying the formula below gives:
| Result | Value |
|---|---|
| Feed condition q | 1.0625 |
| Share vaporised (0–1 for a two-phase feed) | -0.062500 |
| q-line angle from the horizontal | 86.634 ° |
Open this example in the calculator and change any input.
Formula
\(q = \frac{h_V - h_F}{h_V - h_L}, \quad \text{slope} = \frac{q}{q - 1}, \quad \theta = \arctan(\text{slope}),\ 0 \le \theta < 180^\circ\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(h_F\) | Feed enthalpy | J/kg |
| \(h_L\) | Saturated liquid enthalpy at feed-plate pressure | J/kg |
| \(h_V\) | Saturated vapour enthalpy | J/kg |
| \(q\) | Feed condition q | - |
| \(1 - q\) | Share vaporised (0–1 for a two-phase feed) | - |
| \(\theta\) | q-line angle from the horizontal | rad |
Method and standards
Definition.
Where it is used
- Column design and feed preheat decisions.
- Examinations.
Common mistakes
- Enthalpies at different pressures.
- Sign of the slope.
Assumptions and limits
- Constant molal overflow.
- The angle is measured anticlockwise from the +x axis and given between 0° and 180°: a part-vaporised feed (0 < q < 1) has a q-line falling to the right, for example 135° at q = 0.5.
References
- q = (H_V − h_F)/(H_V − h_L); q-line slope q/(q − 1) (McCabe–Thiele)
Questions and answers
Sub-cooled feed, 50 kJ/kg below boiling, latent 800 kJ/kg?
q = 1.0625: the q-line leans steeply right.
Saturated vapour feed?
q = 0: a horizontal q-line.
Why does q matter?
It changes liquid and vapour flows below the feed and so the reflux needed.
Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.