Worked example
Example: Saturated liquid feed. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Relative volatility | 2.5000 - |
| Feed (light component mole fraction) | 40.000 % |
| Distillate purity | 95.000 % |
| Feed condition q (1 saturated liquid, 0 saturated vapour) | 1.0000 - |
| Design reflux multiple | 1.3000 - |
Applying the formula below gives:
| Result | Value |
|---|---|
| Pinch liquid composition | 40.000 % |
| Pinch vapour composition | 62.500 % |
| Minimum reflux ratio | 1.4444 |
| Design reflux ratio | 1.8778 |
Open this example in the calculator and change any input.
Formula
\(y = \frac{\alpha x}{1 + (\alpha - 1)x}, \quad y = \frac{q}{q - 1}x - \frac{x_F}{q - 1}, \quad R_{min} = \frac{x_D - y^*}{y^* - x^*}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(\alpha\) | Relative volatility | - |
| \(x_F\) | Feed (light component mole fraction) | - |
| \(x_D\) | Distillate purity | - |
| \(q\) | Feed condition q (1 saturated liquid, 0 saturated vapour) | - |
| \(R/R_{min}\) | Design reflux multiple | - |
| \(x^*\) | Pinch liquid composition | - |
| \(y^*\) | Pinch vapour composition | - |
| \(R_{min}\) | Minimum reflux ratio | - |
| \(R\) | Design reflux ratio | - |
Method and standards
McCabe–Thiele pinch.
Where it is used
- Column design and debottlenecking.
- Solvent recovery columns.
Common mistakes
- Using it for azeotropes.
- Wrong q for the feed state.
Assumptions and limits
- Constant α and molal overflow.
- The design multiple R/R_min is at least 1.
References
- McCabe–Thiele: pinch at the intersection of the q-line and the equilibrium curve y = αx/(1 + (α − 1)x); R_min = (x_D − y*)/(y* − x*)
Questions and answers
α 2.5, x_F 0.4, x_D 0.95, saturated liquid feed?
Pinch at x 0.4, y 0.625: R_min 1.44.
Design reflux?
Usually 1.1–1.5 × R_min, set by energy versus column cost.
Non-ideal mixtures?
A tangent pinch can occur above the feed; plot the curve.
Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.