Worked example
Example: x 0.3, y 0.55. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Liquid mole fraction (light) | 30.000 % |
| Vapour mole fraction in equilibrium | 55.000 % |
| Another liquid composition | 60.000 % |
Applying the formula below gives:
| Result | Value |
|---|---|
| Relative volatility | 2.8519 |
| Vapour at x′ for constant α | 81.053 % |
Open this example in the calculator and change any input.
Formula
\(\alpha = \frac{y(1 - x)}{x(1 - y)}, \quad y' = \frac{\alpha x'}{1 + (\alpha - 1)x'}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(x\) | Liquid mole fraction (light) | - |
| \(y\) | Vapour mole fraction in equilibrium | - |
| \(x'\) | Another liquid composition | - |
| \(\alpha\) | Relative volatility | - |
| \(y'\) | Vapour at x′ for constant α | - |
Method and standards
Definition of relative volatility for a binary.
Where it is used
- Reducing plant or laboratory data.
Common mistakes
- Mixing mass and mole fractions.
Assumptions and limits
- Binary; constant α between the points.
- α below 1 means the component entered as light is the heavier; the page flags it.
References
- Perry's Chemical Engineers' Handbook
- 9th ed. (McGraw-Hill, 2019)
- sec. 13 (distillation)
- relative volatility definition
- Eq. (13-33)
Questions and answers
Is α constant?
Nearly so for similar molecules (benzene–toluene); far from it for ethanol–water.
What if α < 1?
The component labelled light is in fact the heavier: swap them.
How many points do I need?
One for constant α; check others to confirm it is constant.
Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.