Civil and Structural
Concrete, steel, foundations, soils, hydraulics and quantities.
Mix design, reinforced beams, slabs, columns and quantities.
- Aggregate Moisture Correction to Batch Water
- Bar Bending: Cutting Length of a Bent Bar
- Bulking of Sand: Volume Correction for Batching by Volume
- Concrete Maturity and Equivalent Age (Nurse–Saul)
- Concrete Mix Quantities: Cement, Sand and Aggregate
Beams, columns, connections and section properties.
- Absolute Maximum Moment Under Two Moving Wheel Loads
- Column Base Plate: Bearing Pressure and Thickness (Cantilever)
- Column Load from Tributary Area
- Overhanging Beam: Reactions, Moments and Tip Deflection
- Three-Hinged Parabolic Arch: Thrust and Bending Moment
Bearing capacity, footings, piles and machine foundations.
- Base Pressure under an Eccentrically Loaded Footing
- Footing Size from Safe Bearing Capacity
- Immediate (Elastic) Settlement of a Footing
- Pile Capacity by Static Formulae (α and β Methods)
- Pile Group Efficiency (Converse–Labarre)
Soil properties, earth pressure, settlement and compaction.
- Active Earth Pressure with Surcharge and Water Table
- Atterberg Limits: Plasticity, Liquidity and Consistency Indices
- Compaction: Dry Density, Zero-Air-Voids Line and Relative Compaction
- Coulomb Active Earth Pressure with Wall Friction
- Field Density by Sand Replacement and Degree of Compaction
Open channels, pipes, culverts, drainage and storage.
- Chlorine Dose, Hypochlorite Quantity and CT Value
- Detention Storage Volume (Modified Rational Method)
- Economic Diameter of a Pumping Main
- Flow over a Rectangular or V-Notch Weir
- Gradually Varied Flow: Backwater Length in a Rectangular Channel
Geometric design, pavement thickness and traffic loading.
- Asphalt (Bituminous) Quantity in Tonnes
- Horizontal Circular Curve: Tangent, Length and Chords
- Road Camber (Cross Fall): Crown Height and Slope
- Stopping Sight Distance (Reaction and Braking)
- Superelevation and Side Friction on a Horizontal Curve
Earthwork, brickwork, concrete, steel and paint quantities.
- Backfill and Compacted Fill Volume (Swell and Shrinkage)
- Brickwork Quantity: Bricks, Cement and Sand
- Concrete Block or AAC Block Work Quantity
- Earthwork Volume: Prismoidal and Average End Area
- Floor and Wall Tiles Quantity
Levelling, traverses, areas from coordinates, curves and tacheometry.
- Area of a Plot from Coordinates (Shoelace Formula)
- Curvature and Refraction Correction in Levelling
- Levelling: Reduced Levels by the Height of Instrument Method
- Setting Out a Curve: Offsets from the Long Chord and Tangent
- Steel Tape Corrections: Temperature, Pull, Sag and Slope
Metal accounting, sampling, comminution, crushers, classification, gravity, flotation, thickening and mine ventilation.
- Ball Mill Power by Bond's Equation and Operating Work Index
- Classifier Partition Curve with Bypass and Imperfection
- Comminution Energy by Morrell's Mi Equation
- Comparative Work Index (Berry and Bruce Method)
- Crusher–Screen Circuit Circulating Load from Screen Efficiency