FireCADCalc

Absolute Maximum Moment Under Two Moving Wheel Loads

Absolute maximum bending moment and maximum support reaction in a simply supported girder under two moving wheel loads at a fixed spacing (crane or vehicle axle).

Thermal power plantProcess steam and utilitiesSugar mill and cogenerationRefinery and petrochemicalChemical and fertiliserPulp and paper

Inputs

Examples: 12 m girder, 100 and 60 kN, 3 m apart10 m span, 80 and 20 kN, 7 m apart

Results

Rule: the absolute maximum moment occurs under the heavier wheel when mid-span bisects the distance between that wheel and the resultant. If the wheels are far apart, one wheel alone at mid-span governs. Add impact allowance as your code requires.

Position of the heavier wheel from the left support5.4375m
Absolute maximum moment394.22kN·m
Maximum support reaction145.00kN

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: 12 m girder, 100 and 60 kN, 3 m apart. The inputs, in the units selected above:

InputValue
Span12.000 m
Heavier wheel load100.00 kN
Lighter wheel load60.000 kN
Wheel spacing3.0000 m

Applying the formula below gives:

ResultValue
Position of the heavier wheel from the left support5.4375 m
Absolute maximum moment394.22 kN·m
Maximum support reaction145.00 kN

Open this example in the calculator and change any input.

Formula

\(M_{max} = \frac{(W_1 + W_2)\left(\frac L2 - \frac e2\right)^2}{L}, \quad e = \frac{W_2d}{W_1 + W_2}, \quad M_1 = \frac{W_1L}{4}\ (\text{heavier wheel alone; the larger governs}), \quad R_{max} = W_1 + W_2\frac{L - d}{L}\)

Variables

Symbol Meaning SI unit
\(L\) Span m
\(W_1\) Heavier wheel load N
\(W_2\) Lighter wheel load N
\(d\) Wheel spacing m
\(x\) Position of the heavier wheel from the left support m
\(M_{max}\) Absolute maximum moment N·m
\(R_{max}\) Maximum support reaction N

Method and standards

Moving-load rule.

Where it is used

  • Crane girders and runway beams.
  • Bridge and trestle checks.

Common mistakes

  • Ignoring impact factors.
  • Taking the wheels at mid-span symmetrically.

Assumptions and limits

  • Simply supported; two loads.

References

  • Absolute maximum moment under moving concentrated loads (Timoshenko and Young, Theory of Structures, 2nd ed. (McGraw-Hill))

Questions and answers

Why not put the loads at mid-span?

The moment peaks under a wheel; shifting the pair so mid-span bisects the wheel–resultant distance gives a slightly larger value.

Where does maximum shear occur?

With the heavier wheel just at a support and the other on the span.

What do the defaults represent?

A 12 m crane girder with 100 kN and 60 kN wheels 3 m apart.

Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.