FireCADCalc

Three-Hinged Parabolic Arch: Thrust and Bending Moment

Support reactions, horizontal thrust and bending moment at a section of a three-hinged parabolic arch under a uniform load over the span and a point load.

Thermal power plantProcess steam and utilitiesSugar mill and cogenerationRefinery and petrochemicalChemical and fertiliserPulp and paper

Inputs

Examples: 20 m arch, 4 m rise, 10 kN/m and 40 kN at 5 mPoint load only at 12 m, section at 15 m

Results

Parabolic axis y = 4hx(L − x)/L². Under a uniform load over the whole span the parabolic arch has no bending (funicular shape): the moment comes only from point loads. Positive moment is sagging.

Left vertical reaction130.00kN
Right vertical reaction110.00kN
Horizontal thrust150.00kN
Arch height at the section3.0000m
Bending moment at the section75.000kN·m

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: 20 m arch, 4 m rise, 10 kN/m and 40 kN at 5 m. The inputs, in the units selected above:

InputValue
Span20.000 m
Rise at the crown4.0000 m
Uniform load over the span10.000 kN/m
Point load40.000 kN
Point load distance from the left support5.0000 m
Section distance from the left support5.0000 m

Applying the formula below gives:

ResultValue
Left vertical reaction130.00 kN
Right vertical reaction110.00 kN
Horizontal thrust150.00 kN
Arch height at the section3.0000 m
Bending moment at the section75.000 kN·m

Open this example in the calculator and change any input.

Formula

\(H = \frac{M_{crown}}{h}, \quad M_x = V_Ax - \frac{wx^2}{2} - P\langle x - a\rangle - Hy, \quad y = \frac{4hx(L - x)}{L^2}\)

Variables

Symbol Meaning SI unit
\(L\) Span m
\(h\) Rise at the crown m
\(w\) Uniform load over the span N/m
\(P\) Point load N
\(a\) Point load distance from the left support m
\(x\) Section distance from the left support m
\(V_A\) Left vertical reaction N
\(V_B\) Right vertical reaction N
\(H\) Horizontal thrust N
\(y\) Arch height at the section m
\(M_x\) Bending moment at the section N·m

Method and standards

Equilibrium and crown hinge.

Where it is used

  • Arched roofs, bridges and culverts.
  • Teaching structural analysis.

Common mistakes

  • Using a circular arch with the parabolic formula.
  • Ignoring abutment thrust.

Assumptions and limits

  • Parabolic axis; supports at the same level.

References

  • Statics of the three-hinged arch (Timoshenko and Young, Theory of Structures, 2nd ed. (McGraw-Hill))

Questions and answers

Why do arches carry load efficiently?

The thrust H produces a moment that cancels most of the beam moment; under uniform load a parabolic arch has none.

Why must the abutments be strong?

They must resist the horizontal thrust; flat arches have large thrust.

What do the defaults represent?

A 20 m arch with a 4 m rise, 10 kN/m over the span and 40 kN at 5 m from the left.

Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.