Worked example
Example: 10 m³, 190 x 90 x 90 mm bricks, 10 mm joints, 1:6. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Volume of brickwork | 10.000 m³ |
| Brick length | 190.00 mm |
| Brick width | 90.000 mm |
| Brick height | 90.000 mm |
| Mortar joint thickness | 10.000 mm |
| Sand parts per part of cement in the mortar | 6.0000 - |
| Dry volume factor of mortar | 1.3300 - |
| Allowance for broken bricks | 5.0000 % |
| Bulk density of cement | 1,440.0 kg/m³ |
| Mass of one cement bag | 50.000 kg |
Applying the formula below gives:
| Result | Value |
|---|---|
| Bricks per m³ of masonry (with joints) | 500.00 |
| Bricks to order, with the allowance | 5,250.0 |
| Wet mortar | 2.3050 m³ |
| Dry mortar materials | 3.0657 m³ |
| Cement | 630.65 kg |
| Cement bags | 12.613 |
| Sand | 2.6277 m³ |
Open this example in the calculator and change any input.
Formula
\(n = \frac{1}{(l + j)(w + j)(h + j)}, \quad N = n V (1 + k_w)\)
\(V_m = V - n V\, l w h, \quad V_{m,d} = f_d V_m\)
\(m_c = \frac{V_{m,d}}{1 + s} \rho_c, \quad V_s = V_{m,d} \frac{s}{1 + s}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(V\) | Volume of brickwork | m³ |
| \(l\) | Brick length | m |
| \(w\) | Brick width | m |
| \(h\) | Brick height | m |
| \(j\) | Mortar joint thickness | m |
| \(s\) | Sand parts per part of cement in the mortar | - |
| \(f_d\) | Dry volume factor of mortar | - |
| \(k_w\) | Allowance for broken bricks | - |
| \(\rho_c\) | Bulk density of cement | kg/m³ |
| \(m_b\) | Mass of one cement bag | kg |
| \(n\) | Bricks per m³ of masonry (with joints) | - |
| \(N\) | Bricks to order, with the allowance | - |
| \(V_m\) | Wet mortar | m³ |
| \(V_{m,d}\) | Dry mortar materials | m³ |
| \(m_c\) | Cement | kg |
| \(N_b\) | Cement bags | - |
| \(V_s\) | Sand | m³ |
Method and standards
Each brick with its share of joint occupies (l + j)(w + j)(h + j); the mortar is the wall volume not taken by bricks, converted to dry materials with a dry volume factor and shared in the mix ratio.
Where it is used
- Estimating walls, boundary walls and boiler house enclosures.
- Ordering bricks, cement and sand.
- Checking bills of quantities.
Common mistakes
- Using nominal brick size that already includes the joint.
- Forgetting frogs filled with mortar.
- Ignoring openings in the wall volume.
Assumptions and limits
- Solid bricks; uniform joints.
- The count puts a joint on all three faces of every brick (a modular cell), which suits walls one brick thick or more. In a half-brick wall the thickness has no joint, so it takes fewer bricks per m³ and less mortar; compute such walls from the face area instead.
- Mortar wastage not included.
References
- Masonry quantity estimation from brick and joint dimensions
Questions and answers
How many 190 × 90 × 90 mm bricks in 1 m³?
With 10 mm joints each brick takes 0.2 × 0.1 × 0.1 m, so 500 bricks; 10 m³ with 5 % breakage needs 5 250.
How much mortar?
The space left: 0.23 m³ wet per m³ here, 0.31 m³ dry with a 1.33 factor, giving 63 kg of cement per m³ in 1:6.
Why a dry factor for mortar?
Sand bulks and voids fill when mixed with water, so dry materials exceed the wet volume.
Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.