FireCADCalc

Floor and Wall Tiles Quantity

Number of tiles and boxes for a floor or wall area from the tile size, joint width and wastage, with adhesive or mortar bed volume.

Inputs

Examples: 40 m2 of 600 x 600Wall 25 m2 of 300 x 450Large 800 x 1600 slabs

Results

Tiles needed119.00
Boxes (rounded up)30.000
Bed volume0.80000m³

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: 40 m2 of 600 x 600. The inputs, in the units selected above:

InputValue
Area to tile40.000 m²
Tile length600.00 mm
Tile width600.00 mm
Joint width3.0000 mm
Wastage for cutting and breakage8.0000 %
Tiles per box4.0000 -
Bed thickness (mortar or adhesive)20.000 mm

Applying the formula below gives:

ResultValue
Tiles needed119.00
Boxes (rounded up)30.000
Bed volume0.80000 m³

Open this example in the calculator and change any input.

Formula

\(N = \frac{A}{(l + j)(w + j)}(1 + k_w)\)

Variables

Symbol Meaning SI unit
\(A\) Area to tile m²
\(l\) Tile length m
\(w\) Tile width m
\(j\) Joint width m
\(k_w\) Wastage for cutting and breakage -
\(n_b\) Tiles per box -
\(t_b\) Bed thickness (mortar or adhesive) m
\(N\) Tiles needed -
\(N_b\) Boxes (rounded up) -
\(V_b\) Bed volume m³

Method and standards

Area divided by tile pitch area.

Where it is used

  • Flooring and wall cladding estimates.
  • Purchase.

Common mistakes

  • No wastage.
  • Ignoring joint width for large formats.

Assumptions and limits

  • Rectangular tiles.

References

  • Tiles = area / ((l + j)(w + j)) (Common site practice (quantity estimating))

Questions and answers

40 m² with 600 × 600 tiles, 3 mm joints, 8 % wastage?

119 tiles, 30 boxes of 4.

How much wastage?

More for diagonal patterns and small rooms (10–15 %).

Skirting?

Add the perimeter length separately.

Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.