Worked example
Example: R 300 m, 200 m chord. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Radius | 300.00 m |
| Long chord | 200.00 m |
| Distance from the chord mid-point | 50.000 m |
| Distance along the tangent from the start | 50.000 m |
Applying the formula below gives:
| Result | Value |
|---|---|
| Mid-ordinate R − √(R² − (L/2)²) | 17.157 m |
| Offset from the long chord at x | 12.961 m |
| Perpendicular offset from the tangent R − √(R² − x_t²) | 4.1960 m |
Open this example in the calculator and change any input.
Formula
\(O_0 = R - \sqrt{R^2 - (L/2)^2}, \quad O_x = \sqrt{R^2 - x^2} - (R - O_0), \quad O_t = R - \sqrt{R^2 - x_t^2}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(R\) | Radius | m |
| \(L\) | Long chord | m |
| \(x\) | Distance from the chord mid-point | m |
| \(x_t\) | Distance along the tangent from the start | m |
| \(O_0\) | Mid-ordinate R − √(R² − (L/2)²) | m |
| \(O_x\) | Offset from the long chord at x | m |
| \(O_t\) | Perpendicular offset from the tangent R − √(R² − x_t²) | m |
Method and standards
Circle geometry.
Where it is used
- Setting out roads, drains and pipe bends on site.
- Surveying examinations.
Common mistakes
- Measuring x from the chord end in the mid-point formula.
- Using approximations on sharp curves.
Assumptions and limits
- Exact circle.
References
- Exact circle offsets from the long chord and tangent (surveying texts)
Questions and answers
R 300 m, 200 m chord?
Mid-ordinate 17.157 m; at 50 m from the middle 12.961 m.
Approximate formula?
O ≈ x(L − x)/2R from one end, close for flat curves.
Long curves?
Use deflection angles with a theodolite instead.
Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.