FireCADCalc

Area of a Plot from Coordinates (Shoelace Formula)

Area and perimeter of a plot or polygon from the coordinates of three to eight corners in order, by the coordinate (shoelace) method, area in any area unit.

Inputs

Examples: Five-corner plotRectangle 100 x 50Triangle, clockwise

Corner 1

Corner 2

Corner 3

Corner 4

Corner 5

Corner 6

Corner 7

Corner 8

Results

Enter the corners in order around the boundary; crossing sides give a wrong area.

Area0.87500ha
Perimeter360.08m

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: Five-corner plot. The inputs, in the units selected above:

InputValue
Number of corners5.0000 -
Easting of corner 10 m
Northing of corner 10 m
Easting of corner 285.000 m
Northing of corner 25.0000 m
Easting of corner 3110.00 m
Northing of corner 370.000 m
Easting of corner 450.000 m
Northing of corner 4105.00 m
Easting of corner 5-10.000 m
Northing of corner 560.000 m
Easting of corner 60 m
Northing of corner 60 m
Easting of corner 70 m
Northing of corner 70 m
Easting of corner 80 m
Northing of corner 80 m

Applying the formula below gives:

ResultValue
Area0.87500 ha
Perimeter360.08 m

Open this example in the calculator and change any input.

Formula

\(A = \frac{1}{2}\left|\sum_{i=1}^{n} (E_i N_{i+1} - E_{i+1} N_i)\right|\)

Variables

Symbol Meaning SI unit
\(n\) Number of corners -
\(E_{1}\) Easting of corner 1 m
\(N_{1}\) Northing of corner 1 m
\(E_{2}\) Easting of corner 2 m
\(N_{2}\) Northing of corner 2 m
\(E_{3}\) Easting of corner 3 m
\(N_{3}\) Northing of corner 3 m
\(E_{4}\) Easting of corner 4 m
\(N_{4}\) Northing of corner 4 m
\(E_{5}\) Easting of corner 5 m
\(N_{5}\) Northing of corner 5 m
\(E_{6}\) Easting of corner 6 m
\(N_{6}\) Northing of corner 6 m
\(E_{7}\) Easting of corner 7 m
\(N_{7}\) Northing of corner 7 m
\(E_{8}\) Easting of corner 8 m
\(N_{8}\) Northing of corner 8 m
\(A\) Area m²
\(P\) Perimeter m

Method and standards

Shoelace formula.

Where it is used

  • Land and plot areas.
  • Yard and pond areas from survey.

Common mistakes

  • Corners out of order.
  • Mixing local and grid coordinates.

Assumptions and limits

  • Simple polygon, plane coordinates.
  • The coordinates are shifted to the first corner before summing, so large grid coordinates (UTM) keep their precision.

References

  • Coordinate (shoelace, Gauss) area formula

Questions and answers

What area do the default corners enclose?

8,750 m², or 0.875 hectare.

Order of corners?

Either direction, but in sequence round the boundary.

Curved boundaries?

Add enough corners, or add the curved segments separately.

Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.