FireCADCalc

Horizontal Circular Curve: Tangent, Length and Chords

Tangent length, curve length, long chord, external distance and middle ordinate of a simple circular curve from its radius and deflection angle, with chainages.

Inputs

Examples: R 300 m, 40 degreesR 50 m, 90 degreesR 1000 m, 12 degrees

Results

Tangent length R tan(Δ/2)109.19m
Curve length R Δ209.44m
Long chord 2R sin(Δ/2)205.21m
External distance R(sec(Δ/2) − 1)19.253m
Middle ordinate R(1 − cos(Δ/2))18.092m
Chainage of the start of the curve890.81m
Chainage of the end of the curve1,100.2m

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: R 300 m, 40 degrees. The inputs, in the units selected above:

InputValue
Radius300.00 m
Deflection angle40.000 °
Chainage of the intersection point1,000.0 m

Applying the formula below gives:

ResultValue
Tangent length R tan(Δ/2)109.19 m
Curve length R Δ209.44 m
Long chord 2R sin(Δ/2)205.21 m
External distance R(sec(Δ/2) − 1)19.253 m
Middle ordinate R(1 − cos(Δ/2))18.092 m
Chainage of the start of the curve890.81 m
Chainage of the end of the curve1,100.2 m

Open this example in the calculator and change any input.

Formula

\(T = R\tan\frac{\Delta}{2}, \quad L = R\Delta, \quad C = 2R\sin\frac{\Delta}{2}, \quad E = R\left(\sec\frac{\Delta}{2} - 1\right), \quad M = R\left(1 - \cos\frac{\Delta}{2}\right)\)

Variables

Symbol Meaning SI unit
\(R\) Radius m
\(\Delta\) Deflection angle rad
\(C_{PI}\) Chainage of the intersection point m
\(T\) Tangent length R tan(Δ/2) m
\(L\) Curve length R Δ m
\(C\) Long chord 2R sin(Δ/2) m
\(E\) External distance R(sec(Δ/2) − 1) m
\(M\) Middle ordinate R(1 − cos(Δ/2)) m
\(C_{PC}\) Chainage of the start of the curve m
\(C_{PT}\) Chainage of the end of the curve m

Method and standards

Circle geometry.

Where it is used

  • Road, rail and pipeline alignment.
  • Surveying examinations.

Common mistakes

  • Δ in degrees in R Δ.
  • Chainage of PT as PI + T.

Assumptions and limits

  • Simple circular curve.

References

  • Simple circular curve geometry (surveying texts)

Questions and answers

R 300 m, Δ 40°?

Tangent 109.19 m, curve 209.44 m, external 19.25 m.

Why chainages?

To set the curve out from the start point along the route.

Railways and pipes?

The same geometry applies.

Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.