Worked example
Example: 3 × 3 group, 600 mm at 1.8 m. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Number of rows | 3.0000 - |
| Piles per row | 3.0000 - |
| Pile diameter | 600.00 mm |
| Centre-to-centre spacing | 1.8000 m |
| Single pile capacity | 1,200.0 kN |
Applying the formula below gives:
| Result | Value |
|---|---|
| tan⁻¹(d/s) (in degrees in the formula) | 18.435 ° |
| Group efficiency | 72.689 % |
| Group capacity | 7,850.4 kN |
Open this example in the calculator and change any input.
Formula
\(\eta = 1 - \theta\frac{(n - 1)m + (m - 1)n}{90mn}, \quad \theta = \tan^{-1}\frac ds\ (\text{degrees})\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(m\) | Number of rows | - |
| \(n\) | Piles per row | - |
| \(d\) | Pile diameter | m |
| \(s\) | Centre-to-centre spacing | m |
| \(Q_u\) | Single pile capacity | N |
| \(\theta\) | tan⁻¹(d/s) (in degrees in the formula; shown in degrees) | rad |
| \(\eta\) | Group efficiency | - |
| \(Q_g\) | Group capacity | N |
Method and standards
Converse–Labarre.
Where it is used
- Pile caps under columns, boilers and chimneys.
- Comparing group layouts.
Common mistakes
- Applying it to end-bearing piles.
- Forgetting block failure.
Assumptions and limits
- Rectangular grid; friction piles.
- Block failure of the group is not computed: check it separately and take the smaller capacity.
References
- Converse–Labarre equation (Das, Principles of Foundation Engineering, 7th ed. (Cengage, 2011), ch. 11)
Questions and answers
Why is a group weaker than the sum?
Stress zones around closely spaced friction piles overlap, so each pile mobilises less shaft friction.
How can efficiency be improved?
Wider spacing; but the pile cap grows, so 2.5–3 diameters is the usual compromise.
What do the defaults represent?
A 3 × 3 group of 600 mm piles at 1.8 m spacing, each good for 1,200 kN.
Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.