Worked example
Example: 2 m rigid square at 150 kPa, E 20 MPa. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Net foundation pressure | 150.00 kPa |
| Footing width | 2.0000 m |
| Poisson's ratio of soil | 0.30000 - |
| Soil modulus | 20.000 MPa |
| Influence factor (shape, rigidity, location) | 0.88000 - |
Applying the formula below gives:
| Result | Value |
|---|---|
| Immediate settlement | 12.012 mm |
Open this example in the calculator and change any input.
Formula
\(S_e = \frac{q_nB(1 - \nu^2)I_f}{E_s}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(q_n\) | Net foundation pressure | Pa |
| \(B\) | Footing width | m |
| \(\nu\) | Poisson's ratio of soil | - |
| \(E_s\) | Soil modulus | Pa |
| \(I_f\) | Influence factor (shape, rigidity, location) | - |
| \(S_e\) | Immediate settlement | m |
Method and standards
Elastic half-space.
Where it is used
- Equipment and building foundations.
- Checking differential settlement.
Common mistakes
- Using a clay modulus for drained loading.
- Ignoring a stiff layer at shallow depth.
Assumptions and limits
- Homogeneous elastic soil of semi-infinite depth. No correction for a stiff layer at shallow depth or for embedment; both can reduce the settlement substantially (use depth and thickness correction factors from your text).
References
- Elastic settlement S_e = qB(1 − ν²)I_f/E_s (Schleicher; Das, Principles of Foundation Engineering, 7th ed. (Cengage, 2011), ch. 5)
Questions and answers
Is this the total settlement?
No: in clays consolidation settlement follows over months or years; in sands immediate settlement is most of it.
Where does E_s come from?
Plate load tests, pressuremeter tests or correlations with SPT or CPT.
What do the defaults represent?
A 2 m rigid square footing at 150 kPa on medium-dense sand (E_s = 20 MPa).
Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.