Worked example
Example: Normally consolidated. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Layer thickness | 4.0000 m |
| Initial void ratio | 0.90000 - |
| Compression index | 0.30000 - |
| Recompression (swelling) index | 0.050000 - |
| Initial effective stress at mid-layer | 60.000 kPa |
| Stress increase at mid-layer | 50.000 kPa |
| Preconsolidation stress | 60.000 kPa |
Applying the formula below gives:
| Result | Value |
|---|---|
| Consolidation settlement | 166.26 mm |
| Over-consolidation ratio | 1.0000 |
Open this example in the calculator and change any input.
Formula
\(S_c = \frac{H}{1 + e_0}\left[C_r\log\frac{\sigma'_c}{\sigma'_0} + C_c\log\frac{\sigma'_0 + \Delta\sigma}{\sigma'_c}\right]\ \ (\sigma'_0 + \Delta\sigma > \sigma'_c), \quad S_c = \frac{H}{1 + e_0}C_r\log\frac{\sigma'_0 + \Delta\sigma}{\sigma'_0}\ \ (\text{otherwise})\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(H\) | Layer thickness | m |
| \(e_0\) | Initial void ratio | - |
| \(C_c\) | Compression index | - |
| \(C_r\) | Recompression (swelling) index | - |
| \(\sigma'_0\) | Initial effective stress at mid-layer | Pa |
| \(\Delta\sigma\) | Stress increase at mid-layer | Pa |
| \(\sigma'_c\) | Preconsolidation stress | Pa |
| \(S_c\) | Consolidation settlement | m |
| \(OCR\) | Over-consolidation ratio | - |
Method and standards
One-dimensional consolidation.
Where it is used
- Foundation settlement on clay.
- Embankment and tank settlement.
Common mistakes
- Total instead of effective stress.
- One thick layer without subdivision.
Assumptions and limits
- Primary consolidation only; stresses at mid-layer.
References
- One-dimensional consolidation settlement with C_c and C_r (Terzaghi; Das, Principles of Geotechnical Engineering)
Questions and answers
4 m of clay, e0 0.9, Cc 0.3, 60 → 110 kPa, normally consolidated?
166 mm.
Thick layers?
Split into sub-layers and add their settlements.
How long will it take?
Use the consolidation time calculator.
Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.