Worked example
Example: Cooling with 10 % evaporation. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Feed solution | 1,000.0 kg |
| Solute mass fraction in the feed | 30.000 % |
| Solubility at the final temperature (kg solute per kg water) | 0.20000 - |
| Share of the feed water evaporated | 10.000 % |
Applying the formula below gives:
| Result | Value |
|---|---|
| Crystals formed | 174.00 kg |
| Mother liquor | 756.00 kg |
| Yield (share of solute crystallised) | 58.000 % |
Open this example in the calculator and change any input.
Formula
\(C = F w_F - S\, F(1 - w_F)(1 - E)\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(F\) | Feed solution | kg |
| \(w_F\) | Solute mass fraction in the feed | - |
| \(S\) | Solubility at the final temperature (kg solute per kg water) | - |
| \(E\) | Share of the feed water evaporated | - |
| \(C\) | Crystals formed | kg |
| \(M_L\) | Mother liquor | kg |
| \(Y\) | Yield (share of solute crystallised) | - |
Method and standards
Mass balance.
Where it is used
- Salt, sugar and fertiliser crystallisers.
- ZLD crystallisers.
Common mistakes
- Solubility per kg solution vs per kg water.
- Ignoring hydrate water.
Assumptions and limits
- Anhydrous crystals at equilibrium. Hydrated crystals are not handled: their water of crystallisation must be added to the balance.
- No mother liquor adheres to the crystals; washing and drying losses are not counted.
References
- Solute and water mass balance with the final solubility
Questions and answers
1000 kg at 30 % cooled to a solubility of 0.2 with 10 % of the water evaporated?
174 kg of crystals: 58 % yield.
Hydrates?
Crystals that hold water need the hydrate's molar ratio in the balance.
Real yield?
Lower: mother liquor sticks to the crystals and supersaturation remains.
Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.