FireCADCalc

Minimum Work to Separate an Ideal Mixture

Thermodynamic minimum work to separate a binary ideal mixture into pure products at constant temperature, per mole and for a feed rate (−RT Σ x ln x).

Refinery and petrochemicalChemical and fertiliser

Inputs

Examples: Equimolar at 25 °C, 100 kmol/h10 % at 80 °C

Results

Real columns use 10–100 times this work as heat: the minimum shows how much room there is for heat integration.

Minimum work per mole of feed1.7183kJ/mol
Minimum power47.730kW

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: Equimolar at 25 °C, 100 kmol/h. The inputs, in the units selected above:

InputValue
Mole fraction of component 150.000 %
Temperature25.000 °C
Feed100.00 kmol/h

Applying the formula below gives:

ResultValue
Minimum work per mole of feed1.7183 kJ/mol
Minimum power47.730 kW

Open this example in the calculator and change any input.

Formula

\(W_{min} = -RT_0\left[x_1\ln x_1 + (1 - x_1)\ln(1 - x_1)\right]\)

Variables

Symbol Meaning SI unit
\(x_1\) Mole fraction of component 1 -
\(T_0\) Temperature K
\(F\) Feed mol/s
\(W_{min}\) Minimum work per mole of feed J/mol
\(\dot W_{min}\) Minimum power W
\(R\) Gas constant 8.314 462 618 J/(mol·K)

Method and standards

Ideal-solution Gibbs energy of mixing.

Where it is used

  • Energy benchmarking of separations.

Common mistakes

  • Comparing it with heat duty without exergy conversion.

Assumptions and limits

  • Ideal solution; pure products; isothermal.

References

  • Ideal-solution Gibbs energy of mixing: ΔG_mix = RT Σ x ln x (definition)

Questions and answers

Why is it so small?

It is reversible work at one temperature; distillation degrades heat from reboiler to condenser temperature.

Is it different for non-ideal mixtures?

Yes: add the excess Gibbs energy.

Is it per mole of feed?

Yes.

Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.