FireCADCalc

Simple Batch (Rayleigh) Distillation, Constant α

Moles left in the still, distillate collected and its average composition when a binary charge is boiled from xᵢ to x_f, by the Rayleigh equation, constant α.

Distillery and ethanolRefinery and petrochemicalChemical and fertiliser

Inputs

Examples: 100 kmol 50 % to 20 %, α 2.5Solvent recovery α 4

Results

Left in the still0.024803kmol
Distillate collected0.075197kmol
Average distillate mole fraction59.895%
Light component recovered90.079%

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: 100 kmol 50 % to 20 %, α 2.5. The inputs, in the units selected above:

InputValue
Charge100.00 kmol
Initial mole fraction (light)50.000 %
Final mole fraction in the still20.000 %
Relative volatility2.5000 -

Applying the formula below gives:

ResultValue
Left in the still24.803 kmol
Distillate collected75.197 kmol
Average distillate mole fraction59.895 %
Light component recovered90.079 %

Open this example in the calculator and change any input.

Formula

\(\ln\frac{H_i}{H_f} = \frac{1}{\alpha - 1}\left[\ln\frac{x_i}{x_f} + \alpha\ln\frac{1 - x_f}{1 - x_i}\right], \quad \bar x_D = \frac{H_ix_i - H_fx_f}{H_i - H_f}\)

Variables

Symbol Meaning SI unit
\(H_i\) Charge mol
\(x_i\) Initial mole fraction (light) -
\(x_f\) Final mole fraction in the still -
\(\alpha\) Relative volatility -
\(H_f\) Left in the still mol
\(D\) Distillate collected mol
\(\bar x_D\) Average distillate mole fraction -
\(\eta\) Light component recovered -

Method and standards

Rayleigh equation integrated for constant α.

Where it is used

  • Batch stills and solvent recovery.
  • Laboratory distillation.

Common mistakes

  • Treating the first-drop composition as the average.

Assumptions and limits

  • Constant α; no reflux; one stage.
  • The distillate composition and recovery do not depend on the charge size; with a zero charge the amounts are zero.

References

  • Perry's Chemical Engineers' Handbook
  • 9th ed. (McGraw-Hill, 2019)
  • sec. 13 (distillation)
  • Eqs. (13-124) to (13-126)

Questions and answers

What does the still achieve?

One equilibrium stage: the distillate is richer, but not pure.

Why constant α?

It gives the closed-form integral; for ethanol–water use the pot still calculator with real VLE.

Is the composition average or instantaneous?

Average over the whole collected distillate.

Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.