FireCADCalc

Pot Still Distillation of Ethanol–Water (Rayleigh)

Residue, distillate and average distillate strength when a pot still charge is boiled down to a final strength, by the Rayleigh equation with ethanol–water VLE.

Distillery and ethanolIAPWS-IF97 (water and steam)

Inputs

Examples: Perry 13: 100 mol at 0.18 to 0.06Low wines 25 % vol to 2 % vol

Model fitted at 1 atm; use 0.9–1.2 atm.

Results

A plain pot gives one equilibrium stage: real pots with a helmet and lyne arm reflux a little and do slightly better.

Initial mole fraction9.0993%
Final mole fraction0.62626%
Moles left in the pot68.332%
Residue mass604.35kg
Distillate mass395.65kg
Average distillate mole fraction27.382%
Average distillate strength56.961%
Ethanol recovered in the distillate95.297%

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: Perry 13: 100 mol at 0.18 to 0.06. The inputs, in the units selected above:

InputValue
Charge mass2.3065 kg
Strengths entered asMole fraction
Initial strength of the charge18.000 %
Final strength in the pot6.0000 %
Pressure101.33 kPa

Applying the formula below gives:

ResultValue
Initial mole fraction18.000 %
Final mole fraction6.0000 %
Moles left in the pot69.853 %
Residue mass1.3760 kg
Distillate mass0.93048 kg
Average distillate mole fraction45.805 %
Average distillate strength75.494 %
Ethanol recovered in the distillate76.716 %

Open this example in the calculator and change any input.

Formula

\(\ln\frac{H_i}{H_f} = \int_{x_f}^{x_i}\frac{dx}{y^*(x) - x}, \quad \bar x_D = \frac{H_i x_i - H_f x_f}{H_i - H_f}\)

Variables

Symbol Meaning SI unit
\(M_i\) Charge mass kg
\(\text{basis}\) Strengths entered as -
\(s_i\) Initial strength of the charge -
\(s_f\) Final strength in the pot -
\(P\) Pressure Pa
\(x_i\) Initial mole fraction -
\(x_f\) Final mole fraction -
\(H_f/H_i\) Moles left in the pot -
\(M_f\) Residue mass kg
\(M_D\) Distillate mass kg
\(\bar x_D\) Average distillate mole fraction -
\(\bar q_D\) Average distillate strength -
\(\eta\) Ethanol recovered in the distillate -

Method and standards

Rayleigh equation integrated by Simpson's rule (200 intervals) on the fitted Wilson equilibrium.

Where it is used

  • Pot stills for whisky, rum and brandy.
  • Laboratory distillation.

Common mistakes

  • Taking first-drop strength as the average.
  • Using % vol in a molar balance.

Assumptions and limits

  • Wilson energies fitted at 1 atm; 0.9–1.2 atm only.
  • Binary ethanol–water; congeners and dissolved solids ignored.
  • One equilibrium stage; no reflux.
  • Compositions and recovery do not depend on the charge size; with a zero charge the masses are zero.

References

  • Ethanol–water VLE at about 1 atm: Wilson equation (Perry's Chemical Engineers' Handbook, 9th ed., sec. 4) with energies 399 and 933 cal/mol fitted to FireCAD ethanol–water x–y–T data at 101.325 kPa; ethanol vapour pressure Perry's 9th ed. Table 2-8; water IAPWS-IF97
  • Checked against Gmehling and Onken
  • DECHEMA Chemistry Data Series vol. I/1
  • as quoted in Perry's 9th ed. sec. 13 (simple batch distillation example)
  • Rayleigh equation
  • Perry's 9th ed. sec. 13
  • Eq. (13-124)

Questions and answers

What does the Rayleigh equation say?

ln(Hi/Hf) is the integral of dx/(y − x) from the final to the initial pot composition.

What is Perry's example?

100 mol at 0.18 boiled down to 0.06 leaves 70 mol; the distillate averages 0.46 mole fraction.

Why is the distillate weaker than the first drops?

The vapour gets weaker as the pot is depleted; the average includes the tail.

Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.