Worked example
Example: 100 KLPD. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Plant capacity (absolute alcohol) | 100.00 kL/d |
| Fusel oil draw (% of AA) | 0.30000 % |
| Heads / technical alcohol draw (% of AA) | 2.0000 % |
Applying the formula below gives:
| Result | Value |
|---|---|
| Fusel oil draw per day, as absolute alcohol | 0.30000 m³/d |
| Heads draw per day, as absolute alcohol | 2.0000 m³/d |
| Main product per day | 97.700 kL/d |
Open this example in the calculator and change any input.
Formula
\(\dot V_o = \dot V_e f_o, \quad \dot V_m = \dot V_e (1 - f_o - f_t)\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(\dot V_e\) | Plant capacity (absolute alcohol) | m³/s |
| \(f_o\) | Fusel oil draw (% of AA) | - |
| \(f_t\) | Heads / technical alcohol draw (% of AA) | - |
| \(\dot V_o\) | Fusel oil per day | m³/s |
| \(\dot V_t\) | Heads per day | m³/s |
| \(\dot V_m\) | Main product per day | m³/s |
Method and standards
Balance.
Where it is used
- Production planning.
- By-product reports.
Common mistakes
- Draws taken on bulk volume.
Assumptions and limits
- Ratios on absolute alcohol, so the draws are expressed as absolute alcohol. Fusel oil is mostly higher alcohols and water, so its bulk volume differs from this figure.
References
- Mass balance on absolute alcohol; draw ratios from plant practice
Questions and answers
What is fusel oil?
Higher alcohols (amyl, butyl, propyl) formed by yeast from amino acids.
Why draw it off?
It accumulates in the rectifier and spoils product quality if left.
Is it saleable?
Yes, as a solvent feedstock.
Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.