FireCADCalc

IAPWS-IF97 (water and steam) calculators

IAPWS-IF97 is the formulation behind modern steam tables. FireCAD implements its five regions, the saturation line and the backward equations, checked against the verification tables of the release.

HVAC and Refrigeration › Chillers and cooling 9

HVAC and Refrigeration › Psychrometry 9

Boilers and Power Plant › Steam and water 38

Boilers and Power Plant › Condensers and cooling towers 11

Boilers and Power Plant › Combustion and fuels 4

Boilers and Power Plant › Turbines and cycles 19

Sugar and Ethanol › Steam and power 5

Sugar and Ethanol › Vacuum and water 4

Sugar and Ethanol › Ethanol distillation 9

Boilers and Power Plant › Fuel and ash handling 5

Boilers and Power Plant › Boiler water treatment 4

Boilers and Power Plant › Boilers 21

Boilers and Power Plant › Pressure parts and circulation 12

Chemical and Process › Solutions and concentrations 1

Sugar and Ethanol › Evaporation 9

Boilers and Power Plant › Emissions and stacks 4

Boilers and Power Plant › Plant performance 6

Sugar and Ethanol › Ethanol 3

Boilers and Power Plant › HRSG and waste heat recovery 10

Mechanical › Compressors 2

Sugar and Ethanol › Spent wash and ZLD 4

Boilers and Power Plant › Furnace and heating surfaces 9

Instrumentation and Control › Control valves 1

Mechanical › Heat transfer 13

Sugar and Ethanol › Diffusion 1

Chemical and Process › Pulp and paper 3

Instrumentation and Control › Pressure and level 1

Chemical and Process › Unit operations 1

Electrical › Power and energy 1

Chemical and Process › Separation 2

Materials and Metallurgy › Foundry and furnaces 1

Sugar and Ethanol › Clarification and juice heating 5

Sugar and Ethanol › Pan boiling and crystallisation 2

Civil and Structural › Mining and mineral processing 1

Mechanical › Pumps 2

Chemical and Process › Textile, rice and edible oil 1

Chemical and Process › Process heat exchangers 1

Civil and Structural › Water and hydraulics 1

Chemical and Process › Food and dairy 3

Environmental › Air pollution 1

Instrumentation and Control › Flow measurement 1

Mechanical › Piping 3

Sugar and Ethanol › Centrifugals and sugar house 1

HVAC and Refrigeration › Cooling and heating load 1

More standards: ASME PTC 4 (fired steam generators)ISO 5167 (differential-pressure flow)ISO 12241 (thermal insulation)IEC 60034 (rotating machines)IEC 60364 (low-voltage installations)Hydraulic Institute (pumps)

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.