Worked example
Example: Last effect, 2.25 m tubes. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Pressure in the vapour space (absolute) | 16.000 kPa |
| Tube length | 2.2500 m |
| Juice level as a share of tube height | 33.000 % |
| Juice density | 1,250.0 kg/m³ |
Applying the formula below gives:
| Result | Value |
|---|---|
| Mean depth | 0.37125 m |
| Pressure at the mean depth | 20.551 kPa |
| Rise of boiling temperature | 5.3333 K |
Open this example in the calculator and change any input.
Formula
\(z = \frac{\ell L}{2}, \quad p_m = p + \rho g z, \quad \Delta T_h = T_s(p_m) - T_s(p)\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(p\) | Pressure in the vapour space (absolute) | Pa |
| \(L\) | Tube length | m |
| \(\ell\) | Juice level as a share of tube height | - |
| \(\rho\) | Juice density | kg/m³ |
| \(z\) | Mean depth | m |
| \(p_m\) | Pressure at the mean depth | Pa |
| \(\Delta T_h\) | Rise of boiling temperature | K |
| \(g\) | Standard gravity, 9.806 65 | m/s² |
| \(T_s\) | Saturation temperature of water (IAPWS-IF97) | K |
Method and standards
Hydrostatics with IF97 saturation.
Where it is used
- Evaporator temperature balances.
- Choosing juice levels.
Common mistakes
- Taking the full tube length as the head.
- Using water density for syrup.
Assumptions and limits
- Liquid column without bubbles (conservative).
References
- Hugot
- Handbook of Cane Sugar Engineering
- 3rd ed. (Elsevier, 1986)
- ch. 32
- hydrostatic pressure
- pp. 497–504
- Saturation temperature from IAPWS-IF97
Questions and answers
Why the mean depth?
Boiling starts where pressure allows; Hugot takes the juice at mean depth, half the level, as representative.
Why does the last effect lose most?
At 15–20 kPa a small head changes the saturation temperature far more than at 200 kPa.
How do falling-film evaporators help?
They have no liquid column, so no hydrostatic loss.
Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.