Worked example
Example: Hugot: 20 000 kg/h at 103 °C, 25 m/s. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Vapour flow | 20,000 kg/h |
| Vapour saturation temperature | 103.00 °C |
| Vapour velocity | 25.000 m/s |
| Margin on flow | 1.1000 - |
Applying the formula below gives:
| Result | Value |
|---|---|
| Specific volume of the vapour | 1.5140 m³/kg |
| Vapour volume flow | 9.2519 m³/s |
| Pipe area | 0.37008 m² |
| Pipe diameter | 686.44 mm |
Open this example in the calculator and change any input.
Formula
\(\dot V = k P v''(T), \quad A = \frac{\dot V}{V}, \quad D = \sqrt{\frac{4A}{\pi}}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(P\) | Vapour flow | kg/s |
| \(T\) | Vapour saturation temperature | K |
| \(V\) | Vapour velocity | m/s |
| \(k\) | Margin on flow | - |
| \(v''\) | Specific volume of the vapour | m³/kg |
| \(\dot V\) | Vapour volume flow | m³/s |
| \(A\) | Pipe area | m² |
| \(D\) | Pipe diameter | m |
Method and standards
Continuity with IF97 specific volume.
Where it is used
- Evaporator and pan vapour piping.
- Checking existing pipes after a crush increase.
Common mistakes
- Using liquid specific volume.
- Ignoring bleeding in the flow.
Assumptions and limits
- Saturated vapour.
- The velocity you enter is not checked against Hugot's ranges for each effect (given in the help), and no pressure drop is computed: check long lines separately.
References
- Hugot
- Handbook of Cane Sugar Engineering
- 3rd ed. (Elsevier, 1986)
- ch. 32
- steam and vapour pipes
- Table 32.7 and example
- pp. 513–515
- Specific volume from IAPWS-IF97
Questions and answers
Why higher velocities in later effects?
Vapour at low pressure has a huge volume; higher velocities keep pipes affordable, and the pressure loss matters less in absolute terms.
Why a 10 % margin?
Hugot adds it to cover peaks and bleeding changes.
Pressure drop?
Check long lines separately: a drop of pressure is a loss of temperature difference.
Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.