Worked example
Example: Lagged quadruple. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Number of effects | 4.0000 - |
| Exposed surface of each vessel | 80.000 m² |
| Loss coefficient (surface to air) | 1.8608 W/(m²·K) |
| Ambient temperature | 30.000 °C |
| Temperature of vessel 1 | 104.00 °C |
| Temperature of vessel 2 | 94.000 °C |
| Temperature of vessel 3 | 80.000 °C |
| Temperature of vessel 4 | 55.000 °C |
| Temperature of vessel 5 | 55.000 °C |
Applying the formula below gives:
| Result | Value |
|---|---|
| Total heat loss | 31.708 kW |
| Vapour condensed by the losses | 50.016 kg/h |
| Evaporation lost in later effects | 94.773 kg/h |
Open this example in the calculator and change any input.
Formula
\(\dot Q_i = U A (T_i - T_a), \quad \dot m_i = \frac{\dot Q_i}{h_{fg}(T_i)}, \quad \text{evaporation lost} = \sum (n - i)\dot m_i\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(n\) | Number of effects | - |
| \(A\) | Exposed surface of each vessel | m² |
| \(U\) | Loss coefficient (surface to air) | W/(m²·K) |
| \(T_a\) | Ambient temperature | K |
| \(T_1\) | Temperature of vessel 1 | K |
| \(T_2\) | Temperature of vessel 2 | K |
| \(T_3\) | Temperature of vessel 3 | K |
| \(T_4\) | Temperature of vessel 4 | K |
| \(T_5\) | Temperature of vessel 5 | K |
| \(\dot Q\) | Total heat loss | W |
| \(\Sigma\dot m_i\) | Vapour condensed by the losses | kg/s |
| \(\Sigma(n - i)\dot m_i\) | Evaporation lost in later effects | kg/s |
Method and standards
Wall losses and Hugot's place weighting.
Where it is used
- Justifying lagging.
- Evaporator steam balances.
Common mistakes
- Using bare-pipe coefficients for lagged vessels.
- Ignoring the place weighting.
Assumptions and limits
- Uniform surface temperature.
- The cost is expressed as evaporation lost, not money or fuel. Vessel temperatures must fall along the set.
References
- Hugot
- Handbook of Cane Sugar Engineering
- 3rd ed. (Elsevier, 1986)
- ch. 32
- heat losses (Sandera, Kerr and Webre)
- pp. 543–545
- Latent heat from IAPWS-IF97
Questions and answers
How big are the losses?
Hugot: 2–5 % of the steam for a well-lagged quadruple, up to 10 % unlagged.
Why weight by n − i?
Vapour condensed in vessel i is missing from the heating of vessel i + 1 and all after it.
Which temperature?
The temperature of the juice and vapour in each vessel.
Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.