FireCADCalc

Thermocompressor Entrainment (Truffault)

Entrainment ratio of a steam-jet thermocompressor by Truffault's formula (Hugot eqns 32.18–32.19) from motive, suction and discharge pressures, and the steam saving.

Sugar mill and cogenerationIAPWS-IF97 (water and steam)Boiler

Inputs

Examples: Hugot Table 32.12 case: 25 / 2.03 / 1.50 kg/cm2Lower lift

Results

Hugot: keep the compression to 10 °C or less of saturation temperature and use thermocompression on the first effect or pre-evaporator only.

Saturation temperature at discharge120.07°C
Saturation temperature at suction110.77°C
Theoretical entrainment1.9076
Entrainment ratio1.8122
Vapour aspirated9,061.1kg/h
Steam saving μq/n2,265.3kg/h

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: Hugot Table 32.12 case: 25 / 2.03 / 1.50 kg/cm2. The inputs, in the units selected above:

InputValue
Motive steam pressure (absolute)25.000 kg/cm²
Discharge (mixture) pressure (absolute)2.0300 kg/cm²
Suction (aspirated vapour) pressure (absolute)1.5000 kg/cm²
Efficiency factor μ/μ₀0.95000 -
Motive steam5,000.0 kg/h
Number of effects of the evaporator4.0000 -

Applying the formula below gives:

ResultValue
Saturation temperature at discharge120.07 °C
Saturation temperature at suction110.77 °C
Theoretical entrainment1.9076
Entrainment ratio1.8122
Vapour aspirated9,061.1 kg/h
Steam saving μq/n2,265.3 kg/h

Open this example in the calculator and change any input.

Formula

\((\mu_0 + 1)^2 = \frac{80}{t_m - t_0}\left[\log\frac{P}{p_m} - 0.01(t_0 - 100)\right], \quad \mu = k\mu_0\ (k \approx 0.95), \quad e = \frac{\mu q}{n}\)

Variables

Symbol Meaning SI unit
\(P\) Motive steam pressure (absolute) Pa
\(p_m\) Discharge (mixture) pressure (absolute) Pa
\(p_0\) Suction (aspirated vapour) pressure (absolute) Pa
\(k\) Efficiency factor μ/μ₀ -
\(q\) Motive steam kg/s
\(n\) Number of effects of the evaporator -
\(t_m\) Saturation temperature at discharge K
\(t_0\) Saturation temperature at suction K
\(\mu_0\) Theoretical entrainment -
\(\mu\) Entrainment ratio -
\(y\) Vapour aspirated kg/s
\(e\) Steam saving μq/n kg/s

Method and standards

Truffault's formula as given by Hugot (t in °C).

Where it is used

  • Sizing thermocompressors.
  • Judging thermocompression economy.

Common mistakes

  • Using gauge pressures.
  • Too large a temperature lift.

Assumptions and limits

  • Dry saturated motive steam.
  • Truffault's formula is empirical; its range of validity is not stated with it here. A compression above Hugot's 10 °C of saturation temperature is flagged.

References

  • Hugot
  • Handbook of Cane Sugar Engineering
  • 3rd ed. (Elsevier, 1986)
  • ch. 32
  • thermo-compression
  • eqns 32.17–32.19 and 32.27–32.30
  • pp. 556–565
  • Saturation temperatures from IAPWS-IF97

Questions and answers

What is the entrainment ratio?

Kilograms of low-pressure vapour drawn in per kilogram of motive steam.

Why does it fall so fast with compression?

The formula has the temperature lift in the denominator: doubling the lift roughly halves μ + 1 squared.

How much steam does it save?

About μq/n: the aspirated vapour replaces exhaust that would itself have evaporated n kilograms per kilogram.

Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.