FireCADCalc

Temperature Drops for Equal Evaporator Vessels

Share of the total temperature drop each vessel of a multiple effect with equal surfaces takes at minimum total surface (Hugot: 5 : 6 : 8 : 16 for a quadruple).

Sugar mill and cogeneration

Inputs

Examples: Quadruple 54.7 °CQuintuple 60 °CTriple 45 °C

Results

Hugot's proportions: triple 6 : 8 : 16, quadruple 5 : 6 : 8 : 16, quintuple 35 : 40 : 48 : 64 : 128.

Drop in effect 17.8143K
Drop in effect 29.3771K
Drop in effect 312.503K
Drop in effect 425.006K
Drop in effect 50K

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: Quadruple 54.7 °C. The inputs, in the units selected above:

InputValue
Number of effects4.0000 -
Total net temperature drop54.700 K

Applying the formula below gives:

ResultValue
Drop in effect 17.8143 K
Drop in effect 29.3771 K
Drop in effect 312.503 K
Drop in effect 425.006 K
Drop in effect 50 K

Open this example in the calculator and change any input.

Formula

\(\Delta_n = 1, \quad \Delta_i = \frac{\sum_{j>i}\Delta_j}{2(n - i)}, \quad \text{scaled so that } \sum\Delta_i = \Delta\)

Variables

Symbol Meaning SI unit
\(n\) Number of effects -
\(\Delta\) Total net temperature drop K
\(\Delta_1\) Drop in effect 1 K
\(\Delta_2\) Drop in effect 2 K
\(\Delta_3\) Drop in effect 3 K
\(\Delta_4\) Drop in effect 4 K
\(\Delta_5\) Drop in effect 5 K

Method and standards

Hugot's minimum-surface condition for equal vessels.

Where it is used

  • Checking an existing set of equal vessels.
  • First estimate of temperatures.

Common mistakes

  • Using the apparent instead of the net drop.
  • Applying it with heavy bleeding.

Assumptions and limits

  • No vapour bleeding; equal surfaces.
  • Hugot's proportions start at the triple effect; for n = 2 the same rule is applied by extension and a note says so. Drops for effects beyond n are shown as zero.

References

  • Hugot
  • Handbook of Cane Sugar Engineering
  • 3rd ed. (Elsevier, 1986)
  • ch. 32
  • multiple effect with equal vessels
  • p. 596 (from eqns 32.40–32.43)

Questions and answers

Why does the last vessel take the biggest drop?

Its thick syrup evaporates least per degree, so with equal surfaces it needs the largest drop.

Does this hold with bleeding?

No: it is Hugot's case without vapour bleeding; use the minimum-surface method with real evaporations.

Where does the rule come from?

The condition for minimum total surface with equal vessels: each drop is the sum of the later drops over 2(n − i).

Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.