Worked example
Example: A12 1.6, A21 0.9. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Mole fraction of component 1 | 30.000 % |
| Van Laar constant A₁₂ (= ln γ₁∞) | 1.6000 - |
| Van Laar constant A₂₁ (= ln γ₂∞) | 0.90000 - |
Applying the formula below gives:
| Result | Value |
|---|---|
| Activity coefficient of 1 | 1.6743 |
| Activity coefficient of 2 | 1.1833 |
| Excess Gibbs energy / RT | 0.27243 |
Open this example in the calculator and change any input.
Formula
\(\ln\gamma_1 = A_{12}\left(\frac{A_{21}x_2}{A_{12}x_1 + A_{21}x_2}\right)^2, \quad \ln\gamma_2 = A_{21}\left(\frac{A_{12}x_1}{A_{12}x_1 + A_{21}x_2}\right)^2\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(x_1\) | Mole fraction of component 1 | - |
| \(A_{12}\) | Van Laar constant A₁₂ (= ln γ₁∞) | - |
| \(A_{21}\) | Van Laar constant A₂₁ (= ln γ₂∞) | - |
| \(\gamma_1\) | Activity coefficient of 1 | - |
| \(\gamma_2\) | Activity coefficient of 2 | - |
| \(G^E/RT\) | Excess Gibbs energy / RT | - |
Method and standards
Van Laar equation.
Where it is used
- Quick VLE estimates.
- Teaching non-ideality.
Common mistakes
- Using base-10 constants as natural logs.
Assumptions and limits
- Positive constants; binary.
References
- Perry's Chemical Engineers' Handbook
- 9th ed. (McGraw-Hill, 2019)
- sec. 4 (thermodynamics: excess Gibbs energy models)
- van Laar model
Questions and answers
What are the constants?
The logarithms of the activity coefficients at infinite dilution.
When does van Laar fail?
For constants of opposite sign and strongly associating mixtures.
How do I fit them?
From an azeotrope point or two infinite-dilution measurements.
Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.