Worked example
Example: Seawater-like NaCl. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Molar concentration of solute | 0.60000 mol/L |
| van 't Hoff factor (ions per formula unit) | 2.0000 - |
| Temperature | 25.000 °C |
Applying the formula below gives:
| Result | Value |
|---|---|
| Osmotic pressure | 29.747 bar |
| Equivalent water head | 303.34 m |
Open this example in the calculator and change any input.
Formula
\(\pi = i\, c\, R\, T\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(c\) | Molar concentration of solute | mol/m³ |
| \(i\) | van 't Hoff factor (ions per formula unit) | - |
| \(T\) | Temperature | K |
| \(\pi\) | Osmotic pressure | Pa |
| \(h\) | Equivalent water head | m |
Method and standards
van 't Hoff.
Where it is used
- RO plant feed pressure estimates.
- Examinations.
Common mistakes
- mol/L used as mol/m³.
- Ideal value for strong brines.
Assumptions and limits
- Dilute ideal solution with complete dissociation. Concentrated brines have an osmotic coefficient below 1 (about 0.9 for seawater), so the ideal result is high: 0.6 mol/L NaCl gives 29.7 bar ideal against about 27 bar measured. Multiply by the osmotic coefficient when it is known.
References
- van 't Hoff π = i c R T
Questions and answers
0.6 mol/L NaCl (near seawater) at 25 °C?
About 29.7 bar ideal (measured seawater is about 27 bar).
Why does RO need more?
The applied pressure must exceed the osmotic pressure plus losses to push water through.
Brackish water?
Lower concentration, far lower pressure.
Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.