Worked example
Example: Fly ash 40 % by weight. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Solids density | 2,200.0 kg/m³ |
| Liquid density | 1,000.0 kg/m³ |
| Solids concentration by weight | 40.000 % |
| Slurry flow | 100.00 m³/h |
Applying the formula below gives:
| Result | Value |
|---|---|
| Solids concentration by volume | 23.256 % |
| Slurry density | 1,279.1 kg/m³ |
| Solids flow | 51.163 t/h |
Open this example in the calculator and change any input.
Formula
\(\frac{1}{\rho_m} = \frac{C_w}{\rho_s} + \frac{1 - C_w}{\rho_l}, \quad C_v = C_w\frac{\rho_m}{\rho_s}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(\rho_s\) | Solids density | kg/m³ |
| \(\rho_l\) | Liquid density | kg/m³ |
| \(C_w\) | Solids concentration by weight | - |
| \(\dot V\) | Slurry flow | m³/s |
| \(C_v\) | Solids concentration by volume | - |
| \(\rho_m\) | Slurry density | kg/m³ |
| \(\dot m_s\) | Solids flow | kg/s |
Method and standards
Mass and volume balance.
Where it is used
- Ash slurry and lime slurry systems.
- Slurry pump selection.
Common mistakes
- Bulk instead of particle density.
- Cw and Cv confused.
Assumptions and limits
- No air in the slurry.
References
- Mixture density 1/ρ_m = C_w/ρ_s + (1 − C_w)/ρ_l
Questions and answers
40 % ash by weight, ash 2200 kg/m³?
C_v 0.233, slurry density 1279 kg/m³.
Why Cv?
Settling and pipe flow depend on the volume of solids.
Measuring Cw?
Weigh a sample, dry it, weigh again.
Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.