FireCADCalc

Liquid Mixture Viscosity (Grunberg–Nissan)

Viscosity of a binary liquid mixture from pure-component viscosities and mole fractions by the Grunberg–Nissan equation with interaction parameter G₁₂.

Refinery and petrochemicalChemical and fertiliserPulp and paperFood, dairy and textile

Inputs

Examples: Ideal log meanWith G12 = 1.2

Results

Mixture viscosity0.84853cP
Viscosity with G₁₂ = 0 (log mean)0.84853cP

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: Ideal log mean. The inputs, in the units selected above:

InputValue
Mole fraction of liquid 150.000 %
Viscosity of liquid 10.60000 cP
Viscosity of liquid 21.2000 cP
Interaction parameter (0 = ideal)0 -

Applying the formula below gives:

ResultValue
Mixture viscosity0.84853 cP
Viscosity with G₁₂ = 0 (log mean)0.84853 cP

Open this example in the calculator and change any input.

Formula

\(\ln\mu_m = x_1\ln\mu_1 + x_2\ln\mu_2 + x_1x_2G_{12}\)

Variables

Symbol Meaning SI unit
\(x_1\) Mole fraction of liquid 1 -
\(\mu_1\) Viscosity of liquid 1 Pa·s
\(\mu_2\) Viscosity of liquid 2 Pa·s
\(G_{12}\) Interaction parameter (0 = ideal) -
\(\mu_m\) Mixture viscosity Pa·s
\(\mu_{ideal}\) Viscosity with G₁₂ = 0 (log mean) Pa·s

Method and standards

Grunberg–Nissan equation.

Where it is used

  • Solvent and process liquid properties.

Common mistakes

  • Using mass fractions.
  • Assuming G₁₂ = 0 for associating liquids.

Assumptions and limits

  • Binary; same temperature for all viscosities.

References

  • Perry's Chemical Engineers' Handbook
  • 9th ed. (McGraw-Hill, 2019)
  • sec. 2 (transport properties): Grunberg–Nissan equation

Questions and answers

What is G₁₂?

A binary interaction parameter fitted to data; zero gives the logarithmic (Arrhenius) mean.

Is it good for water mixtures?

Aqueous and alcohol mixtures need large G₁₂ and may peak above both pure viscosities.

Can it blend fuel oils?

Oil blending usually uses the Refutas or ASTM D341 methods instead.

Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.