Worked example
Example: Perry's example: $70 M, 100,000 → 150,000, n 0.67. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Known cost (currency) | 7.0000e+07 - |
| Known capacity | 100,000 - |
| New capacity (same units) | 150,000 - |
| Capacity exponent | 0.67000 - |
| Cost index at the known cost's date | 381.70 - |
| Cost index now | 457.40 - |
| Lang factor (1 = equipment only) | 1.0000 - |
Applying the formula below gives:
| Result | Value |
|---|---|
| Scaled cost | 1.1007e+08 |
| Installed (fixed capital) cost | 1.1007e+08 |
| Cost ratio | 1.5724 |
Open this example in the calculator and change any input.
Formula
\(C_2 = C_1\left(\frac{S_2}{S_1}\right)^n\frac{I_2}{I_1}, \quad C_{FC} = f_L C_2\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(C_1\) | Known cost (currency) | - |
| \(S_1\) | Known capacity | - |
| \(S_2\) | New capacity (same units) | - |
| \(n\) | Capacity exponent | - |
| \(I_1\) | Cost index at the known cost's date | - |
| \(I_2\) | Cost index now | - |
| \(f_L\) | Lang factor (1 = equipment only) | - |
| \(C_2\) | Scaled cost | - |
| \(f_L C_2\) | Installed (fixed capital) cost | - |
| \(C_2/C_1\) | Cost ratio | - |
Method and standards
Perry's Eq. (9-1) with a cost index ratio and Eq. (9-6).
Where it is used
- Feasibility estimates.
- Budget checks.
Common mistakes
- Scaling across different technologies.
- Using an index of another region.
Assumptions and limits
- Same technology and scope.
- A note appears when the new capacity is more than about ten times larger or smaller than the known one.
References
- Perry's Chemical Engineers' Handbook
- 9th ed. (McGraw-Hill, 2019)
- sec. 9
- Eq. (9-1) (cost–capacity scaling) and Eq. (9-6) with Table 9-10 (Lang factors)
Questions and answers
Why 0.6?
Many equipment costs grow with area or volume while capacity grows faster; exponents run from 0.4 to 0.9, averaging about 0.6.
What does Perry's example give?
$70 million at 100,000 units scaled to 150,000 with n = 0.67 and index 381.7 → 457.4: about $110 million.
What is a Lang factor?
The ratio of installed plant cost to purchased equipment cost, about 3–5 by plant type.
Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.