FireCADCalc

Equilibrium Moisture Content by the GAB Isotherm

Equilibrium moisture of a food, grain or other hygroscopic solid at a water activity by the Guggenheim–Anderson–de Boer isotherm with user constants.

Distillery and ethanolRefinery and petrochemicalChemical and fertiliserPulp and paperFood, dairy and textile

Inputs

Examples: Starch-like food at 60 % RHGrain at 75 % RH

Results

GAB constants come from fitting sorption data for the material at the temperature of interest; they change with temperature.

Equilibrium moisture, dry basis0.13033kg/kg
Equilibrium moisture, wet basis11.531%

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: Starch-like food at 60 % RH. The inputs, in the units selected above:

InputValue
Water activity (relative humidity)60.000 %
Monolayer moisture (dry basis)0.070000 kg/kg
GAB constant C10.000 -
GAB constant K0.85000 -

Applying the formula below gives:

ResultValue
Equilibrium moisture, dry basis0.13033 kg/kg
Equilibrium moisture, wet basis11.531 %

Open this example in the calculator and change any input.

Formula

\(M = \frac{M_mCKa_w}{(1 - Ka_w)(1 - Ka_w + CKa_w)}, \quad w = \frac{M}{1 + M}\)

Variables

Symbol Meaning SI unit
\(a_w\) Water activity (relative humidity) -
\(M_m\) Monolayer moisture (dry basis) kg/kg
\(C\) GAB constant C -
\(K\) GAB constant K -
\(M\) Equilibrium moisture, dry basis kg/kg
\(w\) Equilibrium moisture, wet basis -

Method and standards

GAB isotherm.

Where it is used

  • Dryer end-point and storage stability.
  • Packaging and humidity control.

Common mistakes

  • Using constants fitted at another temperature.
  • Mixing wet and dry basis.

Assumptions and limits

  • Constants valid over the fitted range.

References

  • Perry's Chemical Engineers' Handbook
  • 9th ed. (McGraw-Hill, 2019)
  • sec. 12 (equilibrium moisture and sorption isotherms)
  • van den Berg and Bruin (1981)
  • GAB equation

Questions and answers

What is equilibrium moisture?

The moisture a solid reaches when left long enough in air of a given humidity and temperature; a dryer cannot go below it at those air conditions.

Why GAB?

It fits most foods and grains from about 5 % to 90 % relative humidity with three physically meaningful constants.

What do the defaults represent?

A starch-like food at 60 % relative humidity, with typical GAB constants; enter your material's fitted values.

Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.