Worked example
Example: Water at 20 °C in a 1 mm tube. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Liquid | Water (surface tension from IAPWS at the temperature) |
| Temperature (for water) | 20.000 °C |
| Surface tension (other liquid) | 0.050000 N/m |
| Contact angle | 0 ° |
| Tube inside diameter | 1.0000 mm |
| Liquid density | 998.00 kg/m³ |
Applying the formula below gives:
| Result | Value |
|---|---|
| Surface tension used | 0.072736 N/m |
| Capillary rise 4σ cos θ/(ρ g d) | 29.728 mm |
Open this example in the calculator and change any input.
Formula
\(h = \frac{4 \sigma \cos\theta}{\rho g d}, \quad \sigma_w = B\tau^{\mu}(1 + b\tau), \ \tau = 1 - \frac{T}{T_c}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(\text{liquid}\) | Liquid | - |
| \(T\) | Temperature (for water) | K |
| \(\sigma\) | Surface tension (other liquid) | N/m |
| \(\theta\) | Contact angle | rad |
| \(d\) | Tube inside diameter | m |
| \(\rho\) | Liquid density | kg/m³ |
| \(\sigma_u\) | Surface tension used | N/m |
| \(h\) | Capillary rise 4σ cos θ/(ρ g d) | m |
Method and standards
Surface tension balancing the column weight.
Where it is used
- Level gauges and manometers.
- Porous media and wicking.
Common mistakes
- Radius for diameter.
- Contaminated surfaces change σ and θ.
Assumptions and limits
- Narrow, clean tube: the diameter well below the capillary length √(σ/(ρg)) (about 2.7 mm for water); larger tubes are flagged.
- For water the surface tension follows the temperature but the density is your entry: a density more than 0.5 % from water's at that temperature is flagged.
References
- Jurin's law h = 2σ cos θ/(ρ g r)
- IAPWS R1-76(2014) surface tension of water
Questions and answers
How high does water rise in a 1 mm tube at 20 °C?
About 30 mm.
Why does it matter for gauges?
Small-bore manometers and level glasses read high from capillarity.
Mercury?
It is depressed: the contact angle is about 140°.
Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.