Worked example
Example: 7 bar at 30°, 1.5 m. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Pressure at the nozzle | 7.0000 bar |
| Liquid density | 998.00 kg/m³ |
| Nozzle velocity coefficient | 0.97000 - |
| Elevation angle | 30.000 ° |
| Nozzle height above the target level | 1.5000 m |
Applying the formula below gives:
| Result | Value |
|---|---|
| Jet exit velocity | 36.330 m/s |
| Maximum height above the nozzle | 16.824 m |
| Time of flight | 3.7855 s |
| Horizontal reach to the target level | 119.10 m |
| Reach at 45° from target level (no drag) | 134.59 m |
Open this example in the calculator and change any input.
Formula
\(V_0 = C_v\sqrt{\frac{2\Delta p}{\rho}}, \quad t = \frac{V_0\sin\theta + \sqrt{V_0^2\sin^2\theta + 2gh_0}}{g}, \quad x = V_0\cos\theta\ t, \quad h_{max} = \frac{V_0^2\sin^2\theta}{2g}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(\Delta p\) | Pressure at the nozzle | Pa |
| \(\rho\) | Liquid density | kg/m³ |
| \(C_v\) | Nozzle velocity coefficient | - |
| \(\theta\) | Elevation angle | rad |
| \(h_0\) | Nozzle height above the target level | m |
| \(V_0\) | Jet exit velocity | m/s |
| \(h_{max}\) | Maximum height above the nozzle | m |
| \(t\) | Time of flight | s |
| \(x\) | Horizontal reach to the target level | m |
| \(x_{45}\) | Reach at 45° from target level (no drag) | m |
Method and standards
Bernoulli and projectile motion.
Where it is used
- Cooling-tower and spray-pond nozzles.
- Wash and fire-water monitors (first estimate).
Common mistakes
- Ignoring drag for long throws.
- Gauge vs. absolute pressure (use the gauge pressure across the nozzle).
Assumptions and limits
- No air drag; jet stays coherent.
References
- Bernoulli exit velocity and projectile motion without drag (definitions)
Questions and answers
Why does the real jet fall short?
Air drag and break-up into drops; the no-drag value is an upper bound.
Which angle throws farthest?
45° without drag; with drag the best angle is about 30–35°.
What do the defaults give?
7 bar at 30° from 1.5 m: about 36 m/s exit and over 100 m in theory, much less in practice.
Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.