Worked example
Example: 2 m² board, Cd 1.2, 30 m/s wind. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Drag coefficient | 1.2000 - |
| Frontal area | 2.0000 m² |
| Fluid density | 1.2000 kg/m³ |
| Relative velocity | 30.000 m/s |
Applying the formula below gives:
| Result | Value |
|---|---|
| Dynamic pressure ½ ρ v² | 540.00 Pa |
| Drag force | 1.2960 kN |
| Power to overcome drag F v | 38.880 kW |
Open this example in the calculator and change any input.
Formula
\(F_D = C_D A \frac{\rho v^2}{2}, \quad P = F_D\, v\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(C_D\) | Drag coefficient | - |
| \(A\) | Frontal area | m² |
| \(\rho\) | Fluid density | kg/m³ |
| \(v\) | Relative velocity | m/s |
| \(q\) | Dynamic pressure ½ ρ v² | Pa |
| \(F_D\) | Drag force | N |
| \(P\) | Power to overcome drag F v | W |
Method and standards
Drag equation.
Where it is used
- Signboards, stacks and conveyors in wind.
- Vehicle and fan loads.
Common mistakes
- Wrong reference area.
- C_D from a different Reynolds range.
Assumptions and limits
- Steady flow.
References
- Drag equation F = C_D A ½ρv² (Textbook fluid mechanics (White, Fluid Mechanics))
Questions and answers
2 m² at 30 m/s in air with C_D 1.2?
Dynamic pressure 540 Pa, force 1296 N.
Is this a wind load for design?
Wind codes add gust, height and shape factors; use the code.
Why does power rise so fast?
It goes with v³.
Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.