Worked example
Example: 3 m³/s in a 2 m channel, 0.5 m deep. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Flow | 10,800 m³/h |
| Channel width | 2.0000 m |
| Actual depth | 0.50000 m |
Applying the formula below gives:
| Result | Value |
|---|---|
| Critical depth (q²/g)^{1/3} | 0.61219 m |
| Critical velocity | 2.4502 m/s |
| Minimum specific energy 1.5 y_c | 0.91829 m |
| Specific energy at the actual depth | 0.95887 m |
| Froude number at the actual depth | 1.3548 |
Open this example in the calculator and change any input.
Formula
\(y_c = \left(\frac{q^2}{g}\right)^{1/3}, \quad E = y + \frac{v^2}{2g}, \quad Fr = \frac{v}{\sqrt{g y}}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(Q\) | Flow | m³/s |
| \(b\) | Channel width | m |
| \(y\) | Actual depth | m |
| \(y_c\) | Critical depth (q²/g)^{1/3} | m |
| \(v_c\) | Critical velocity | m/s |
| \(E_{min}\) | Minimum specific energy 1.5 y_c | m |
| \(E\) | Specific energy at the actual depth | m |
| \(Fr\) | Froude number at the actual depth | - |
Method and standards
Rectangular channel hydraulics.
Where it is used
- Drains, flumes and spillways.
- Hydraulics examinations.
Common mistakes
- Total flow instead of flow per metre width.
- Non-rectangular sections.
Assumptions and limits
- Rectangular channel, uniform velocity.
References
- Open-channel hydraulics (Chow, Open-Channel Hydraulics)
Questions and answers
3 m³/s in a 2 m channel?
Critical depth 0.612 m; at 0.5 m depth Fr 1.35 (supercritical).
What does critical depth mean?
The depth of minimum specific energy for the flow, where Fr = 1.
Where does it occur?
At free overfalls, weir crests and changes of slope.
Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.