Worked example
Example: Dust in 20 L sphere, 600 bar/s, to 10 m³. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Maximum rate of pressure rise in the test | 600.00 - |
| Test vessel volume | 20.000 L |
| Volume of the vessel of interest | 10.000 m³ |
Applying the formula below gives:
| Result | Value |
|---|---|
| Deflagration index (bar·m/s) | 162.87 |
| Expected max rate in V₂ (bar/s) | 75.595 |
| Dust class St by K_St (dusts only; 1: ≤200, 2: ≤300, 3: >300) | 1.0000 |
Open this example in the calculator and change any input.
Formula
\(K = \left(\frac{dP}{dt}\right)_{max}V^{1/3}, \quad \left(\frac{dP}{dt}\right)_2 = \frac{K}{V_2^{1/3}}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \((dP/dt)_{max}\) | Maximum rate of pressure rise in the test | - |
| \(V\) | Test vessel volume | m³ |
| \(V_2\) | Volume of the vessel of interest | m³ |
| \(K\) | Deflagration index (bar·m/s) | - |
| \((dP/dt)_2\) | Expected max rate in V₂ (bar/s) | - |
| \(St\) | Dust class St by K_St (dusts only; 1: ≤200, 2: ≤300, 3: >300) | - |
Method and standards
Cubic law.
Where it is used
- Comparing dust and gas explosion severity.
Common mistakes
- Using it for vent sizing.
- Comparing tests from different vessel sizes or ignition energies.
Assumptions and limits
- Similar geometry and turbulence.
- The St class is for dusts; it is shown for any K but has no meaning for a gas K_G. St 0 (no explosion) comes from a test that shows no explosion, so it never results from a positive rate here.
References
- Perry's Chemical Engineers' Handbook
- 9th ed. (McGraw-Hill, 2019)
- sec. 23 (deflagration index K_G, K_St = (dP/dt)max V^⅓; dust explosion classes)
Questions and answers
What is K_St?
The maximum rate of pressure rise normalised by vessel size; it ranks how violently a dust explodes.
What are the dust classes?
St 1 up to 200, St 2 up to 300, St 3 above 300 bar·m/s.
Why does a bigger vessel see a slower rise?
The flame takes longer to cross it: dP/dt falls as V^−⅓.
Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.