Worked example
Example: 50 ppm for 30 min, illustrative constants. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Concentration | 50.000 ppm |
| Exposure time | 30.000 min |
| Probit constant a (for concentration in ppm and time in minutes) | -8.2900 - |
| Probit constant b (ppm, minutes) | 0.92000 - |
| Concentration exponent n (ppm, minutes) | 2.0000 - |
Applying the formula below gives:
| Result | Value |
|---|---|
| Haber dose C·t (ppm·min) | 1,500.0 |
| Toxic load (ppmⁿ·min) | 75,000 |
| Probit | 2.0372 |
| Probability of the effect | 0.15244 % |
Open this example in the calculator and change any input.
Formula
\(D = C\,t, \quad Y = a + b\ln(C^nt), \quad P = \tfrac12\left[1 + \mathrm{erf}\left(\frac{Y - 5}{\sqrt2}\right)\right]\ \ (C\ \mathrm{ppm},\ t\ \mathrm{min})\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(C\) | Concentration | - |
| \(t\) | Exposure time | s |
| \(a\) | Probit constant a (for concentration in ppm and time in minutes) | - |
| \(b\) | Probit constant b (ppm, minutes) | - |
| \(n\) | Concentration exponent n (ppm, minutes) | - |
| \(D\) | Haber dose C·t (ppm·min) | - |
| \(C^nt\) | Toxic load (ppmⁿ·min) | - |
| \(Y\) | Probit | - |
| \(P\) | Probability of the effect | - |
Method and standards
Haber's law and the probit method.
Where it is used
- Consequence screening for toxic releases.
Common mistakes
- Mixing ppm and mg/m³ constants.
- Using constants for another effect.
Assumptions and limits
- Constant concentration during the exposure.
- The probit constants must be for concentration in ppm and time in minutes; sets for mg/m³ or seconds need converting.
References
- Perry's Chemical Engineers' Handbook
- 9th ed. (McGraw-Hill, 2019)
- sec. 23
- Eq. (23-15) (Haber dose) and probit methods
- Probit to probability: P = ½[1 + erf((Y − 5)/√2)]
Questions and answers
What is a probit?
A transformed probability: Y = 5 means 50 %, each unit is one standard deviation.
Why Cⁿt instead of C·t?
For many gases short high concentrations harm more than Haber's simple product implies; n > 1 captures that.
Where do a, b and n come from?
Published probit tables for each substance and effect; the defaults are illustrative.
Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.