Worked example
Example: 100 ppm 4 h + 50 ppm 2 h; A 100/200 + B 50/100. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Concentration in period 1 | 100.00 - |
| Duration of period 1 | 4.0000 h |
| Concentration in period 2 | 50.000 - |
| Duration of period 2 | 2.0000 h |
| Concentration in period 3 | 0 - |
| Duration of period 3 | 2.0000 h |
| Mixture: concentration of substance A | 100.00 - |
| TLV of substance A | 200.00 - |
| Mixture: concentration of substance B | 50.000 - |
| TLV of substance B | 100.00 - |
| Mixture: concentration of substance C (0 = none) | 0 - |
| TLV of substance C | 100.00 - |
Applying the formula below gives:
| Result | Value |
|---|---|
| Eight-hour time-weighted average (same unit as C) | 62.500 |
| Exposure index of the mixture | 1.0000 |
| TLV of the mixture as sampled (same unit) | 150.00 |
Open this example in the calculator and change any input.
Formula
\(TWA = \frac{C_1t_1 + C_2t_2 + \dots}{8\ \text{h}}, \quad EI = \sum\frac{C_i}{TLV_i}, \quad TLV_{mix} = \frac{\sum C_i}{EI}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(C_1\) | Concentration in period 1 | - |
| \(t_1\) | Duration of period 1 | s |
| \(C_2\) | Concentration in period 2 | - |
| \(t_2\) | Duration of period 2 | s |
| \(C_3\) | Concentration in period 3 | - |
| \(t_3\) | Duration of period 3 | s |
| \(C_A\) | Mixture: concentration of substance A | - |
| \(TLV_A\) | TLV of substance A | - |
| \(C_B\) | Mixture: concentration of substance B | - |
| \(TLV_B\) | TLV of substance B | - |
| \(C_C\) | Mixture: concentration of substance C (0 = none) | - |
| \(TLV_C\) | TLV of substance C | - |
| \(TWA\) | Eight-hour time-weighted average (same unit as C) | - |
| \(\sum C_i/TLV_i\) | Exposure index of the mixture | - |
| \(TLV_{mix}\) | TLV of the mixture as sampled (same unit) | - |
Method and standards
Time weighting and the additive mixture rule.
Where it is used
- Industrial hygiene checks for solvent use.
- Ventilation targets.
Common mistakes
- Dividing by the actual sampling time.
- Adding non-additive substances.
Assumptions and limits
- Additive effects; 8-hour shift.
References
- Crowl and Louvar
- Chemical Process Safety: Fundamentals with Applications
- 2nd ed. (Prentice Hall, 2002)
- ch. 3
- eqs. 3-1 to 3-3 (TLV-TWA and mixtures)
Questions and answers
What unit should I use?
Any concentration unit, as long as the TLVs are in the same unit (usually ppm or mg/m³).
When is the mixture rule not valid?
When the substances act on different organs; then each is compared with its own limit separately.
What do the defaults represent?
100 ppm for 4 h and 50 ppm for 2 h; a mixture of 100 ppm of A (TLV 200) and 50 ppm of B (TLV 100).
Method and article reviewed by FireCAD engineering on 17 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.