FireCADCalc

Plant Operating Cost per Tonne of Product

Cash operating cost per tonne from raw materials, utilities, labour, maintenance and overheads, with depreciation for the total production cost (Perry sec. 9).

Sugar mill and cogenerationDistillery and ethanolRefinery and petrochemicalChemical and fertiliserPulp and paperFood, dairy and textile

Inputs

Examples: 100 kt/y plantSmall plant 5 kt/y

Results

At low capacity use, fixed costs per tonne rise sharply: run the calculator at the expected, not the nameplate, output.

Cash operating cost per tonne14,140
Depreciation per tonne333.33
Total production cost per tonne14,473
Raw materials share of cash cost84.866%

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: 100 kt/y plant. The inputs, in the units selected above:

InputValue
Annual production (t)100,000 -
Raw materials per tonne12,000 -
Utilities per tonne1,500.0 -
Labour per year2.0000e+07 -
Maintenance as a share of fixed capital per year4.0000 %
Fixed capital5.0000e+08 -
Overheads as a share of labour and maintenance60.000 %
Depreciation life (years, straight line)15.000 -

Applying the formula below gives:

ResultValue
Cash operating cost per tonne14,140
Depreciation per tonne333.33
Total production cost per tonne14,473
Raw materials share of cash cost84.866 %

Open this example in the calculator and change any input.

Formula

\(C_{cash} = C_{RM} + C_U + \frac{(C_L + mC_{FC})(1 + o)}{P}, \quad C_D = \frac{C_{FC}}{nP}\)

Variables

Symbol Meaning SI unit
\(P\) Annual production (t) -
\(C_{RM}\) Raw materials per tonne -
\(C_U\) Utilities per tonne -
\(C_L\) Labour per year -
\(m\) Maintenance as a share of fixed capital per year -
\(C_{FC}\) Fixed capital -
\(o\) Overheads as a share of labour and maintenance -
\(n\) Depreciation life (years, straight line) -
\(C_{cash}\) Cash operating cost per tonne -
\(C_D\) Depreciation per tonne -
\(C_{tot}\) Total production cost per tonne -
\(C_{RM}/C_{cash}\) Raw materials share of cash cost -

Method and standards

Perry's manufacturing cost structure.

Where it is used

  • Product costing and pricing.

Common mistakes

  • Using nameplate output.
  • Counting depreciation as cash.

Assumptions and limits

  • Straight-line depreciation.

References

  • Perry's Chemical Engineers' Handbook
  • 9th ed. (McGraw-Hill, 2019)
  • sec. 9 (manufacturing cost: direct, fixed and overhead charges)

Questions and answers

What is cash cost?

Everything except depreciation and financing: what each tonne costs to make this year.

Why do raw materials dominate?

In most process plants they are 50–80 % of cash cost.

Is tax included?

No.

Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.