Worked example
Example: Boiler 10 M, residual 0.5 M, 15 years, after 5. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Cost of the asset (your currency) | 1.0000e+07 - |
| Residual (salvage) value at the end of life | 500,000 - |
| Useful life, years | 15.000 - |
| Year to report the book value after | 5.0000 - |
Applying the formula below gives:
| Result | Value |
|---|---|
| Straight-line depreciation per year | 633,333 |
| Book value after year k, straight line | 6,833,333 |
| Written-down value rate that reaches the residual value | 18.104 % |
| First-year depreciation, written-down value | 1,810,363 |
| Book value after year k, written-down value | 3,684,031 |
Open this example in the calculator and change any input.
Formula
\(D_{SL} = \frac{C - S}{n}, \quad B_{SL} = C - k D_{SL}\)
\(r = 1 - (S/C)^{1/n}, \quad D_1 = C r, \quad B_{WDV} = C (1 - r)^k\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(C\) | cost | currency |
| \(S\) | residual value | currency |
| \(n\) | life | years |
| \(k\) | years elapsed | years |
| \(D_{SL}\) | straight-line depreciation per year | currency |
| \(B_{SL}\) | book value, straight line | currency |
| \(r\) | written-down rate | - |
| \(D_1\) | first-year depreciation, WDV | currency |
| \(B_{WDV}\) | book value, WDV | currency |
Method and standards
Straight line spreads cost less residual value evenly; the written-down value method takes a constant share of the remaining book value, with the rate that reaches the residual value at the end of the life.
Where it is used
- Project evaluation and replacement decisions.
- Estimating asset book values.
- Teaching engineering economics.
Common mistakes
- Using a zero residual value with the WDV method (it never reaches zero).
- Mixing tax and book depreciation.
- Forgetting part-year rules.
Assumptions and limits
- Whole years; constant life and residual value.
- A zero residual value is allowed for straight line; the written-down-value results are then not shown.
References
- Straight-line and written-down-value methods
Questions and answers
How does a 10 M boiler with 0.5 M residual over 15 years depreciate?
Straight line: 0.633 M a year, book value 6.83 M after 5 years. Written-down value: 18.1 % a year, book value 3.68 M after 5 years.
Which method gives more depreciation early?
Written-down value: it takes a fixed share of a falling balance, so early years carry the most.
Are these the tax rates?
No. Tax and company-law depreciation follow the rates your tax authority sets.
Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.