FireCADCalc

Break-Even Price of a New Fuel (Fuel Switching)

Highest new-fuel price at which switching still pays, from the old fuel's price, both CVs and efficiencies, the annual heat and the conversion cost.

Inputs

Examples: Oil to biomassCoal to natural gas, no capital

Results

Below the break-even price the new fuel saves money after paying for the conversion; add handling and ash costs for solid fuels.

Old fuel per year1,701.6t
New fuel per year4,962.8t
Capital recovery factor20.541%
Break-even new fuel price per kg22.760

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: Oil to biomass. The inputs, in the units selected above:

InputValue
Old fuel price per kg70.000 -
Old fuel calorific value (same GCV or NCV basis as η₁)41.000 MJ/kg
Efficiency on the old fuel86.000 %
New fuel calorific value (same basis as CV₁ and η₂)15.500 MJ/kg
Efficiency on the new fuel78.000 %
Useful heat per year60,000 GJ
Conversion cost3.0000e+07 -
Interest rate10.000 %
Recovery period (years)7.0000 -

Applying the formula below gives:

ResultValue
Old fuel per year1,701.6 t
New fuel per year4,962.8 t
Capital recovery factor20.541 %
Break-even new fuel price per kg22.760

Open this example in the calculator and change any input.

Formula

\(p_{2,be} = \frac{m_1 p_1 - C_0\,CRF}{m_2}, \quad m_i = \frac{Q}{\eta_i CV_i}, \quad CRF = \frac{i(1 + i)^n}{(1 + i)^n - 1}\)

Variables

Symbol Meaning SI unit
\(p_1\) Old fuel price per kg -
\(CV_1\) Old fuel calorific value (same GCV or NCV basis as η₁) J/kg
\(\eta_1\) Efficiency on the old fuel -
\(CV_2\) New fuel calorific value (same basis as CV₁ and η₂) J/kg
\(\eta_2\) Efficiency on the new fuel -
\(Q\) Useful heat per year J
\(C_0\) Conversion cost -
\(i\) Interest rate -
\(n\) Recovery period (years) -
\(m_1\) Old fuel per year kg
\(m_2\) New fuel per year kg
\(CRF\) Capital recovery factor -
\(p_{2,be}\) Break-even new fuel price per kg -

Method and standards

Annual cost balance.

Where it is used

  • Coal, oil, gas and biomass switching studies.
  • Fuel contract negotiation.

Common mistakes

  • Gross vs net CV mixed.
  • Ignoring handling costs.

Assumptions and limits

  • Constant prices.
  • Both calorific values and both efficiencies on one basis (all GCV or all NCV).
  • A negative break-even price (conversion cost above the old fuel bill) is flagged.

References

  • Equal annual cost: m₁p₁ = m₂p₂ + C₀·CRF
  • with m = Q/(η CV)

Questions and answers

Oil at 70/kg to biomass, 60,000 GJ a year, 3 crore conversion?

Biomass pays below about 22.8 per kg.

Why include the CRF?

It spreads the conversion cost into a yearly charge with interest.

Lower efficiency on the new fuel?

It raises the fuel quantity and lowers the break-even price.

Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.