Worked example
Example: 100 000 first cost, 90 000 renewal, 8 %, 10 years. The inputs, in the units selected above:
| Input | Value |
|---|---|
| First cost (currency) | 100,000 - |
| Replacement cost less salvage (currency) | 90,000 - |
| Interest rate per year | 8.0000 % |
| Service life (years) | 10.000 - |
Applying the formula below gives:
| Result | Value |
|---|---|
| Capitalised cost | 177,658 |
| Equivalent annual replacement charge | 6,212.7 |
Open this example in the calculator and change any input.
Formula
\(K = C_V + \frac{C_R}{(1 + i)^n - 1}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(C_V\) | First cost (currency) | - |
| \(C_R\) | Replacement cost less salvage (currency) | - |
| \(i\) | Interest rate per year | - |
| \(n\) | Service life (years) | - |
| \(K\) | Capitalised cost | - |
| \(EAC\) | Equivalent annual replacement charge | - |
Method and standards
Perry's capitalised cost.
Where it is used
- Material selection: carbon steel against alloy.
Common mistakes
- Forgetting salvage.
- Mixing nominal and real rates.
Assumptions and limits
- Constant interest; identical replacements.
References
- Perry's Chemical Engineers' Handbook
- 9th ed. (McGraw-Hill, 2019)
- sec. 9 (capitalised cost: K = C_V + C_R/[(1 + i)ⁿ − 1])
Questions and answers
What does capitalised cost mean?
The money needed today to buy the equipment and fund its replacement every n years forever.
Why use it?
It compares items of different life on one figure.
Is it the same as EAC?
Not quite. K × i is the equivalent annual cost of owning the item forever (first cost and renewals) and ranks alternatives the same way as K; the EAC shown here is only the yearly charge for the renewals, (K − C_V) × i.
Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.