FireCADCalc

Pumping Energy Cost and Wire-to-Water Efficiency

Hydraulic power, wire-to-water efficiency, electrical input, yearly energy and cost of pumping from flow, head, pump and motor efficiencies, hours and tariff.

Thermal power plantProcess steam and utilitiesRefinery and petrochemicalChemical and fertiliser

Inputs

Examples: 150 m³/h at 40 m, 75 % / 93 %, 6 000 h at 8Cooling water 1 200 m³/h at 25 m, 82 % / 95 %, 8 000 h at 7Small dosing 2 m³/h at 60 m, 40 % / 80 %, 3 000 h at 10

Results

Hydraulic power ρ g Q H16.312kW
Electrical input23.386kW
Wire-to-water efficiency69.750%
Energy in a year140,316kWh
Cost in a year1,122,528
Energy per volume pumped0.15591kWh/m³

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: 150 m³/h at 40 m, 75 % / 93 %, 6 000 h at 8. The inputs, in the units selected above:

InputValue
Flow150.00 m³/h
Total head40.000 m
Liquid density998.00 kg/m³
Pump efficiency75.000 %
Motor (and drive) efficiency93.000 %
Running hours in a year6,000.0 h
Electricity price per kWh (your currency)8.0000 -

Applying the formula below gives:

ResultValue
Hydraulic power ρ g Q H16.312 kW
Electrical input23.386 kW
Wire-to-water efficiency69.750 %
Energy in a year140,316 kWh
Cost in a year1,122,528
Energy per volume pumped0.15591 kWh/m³

Open this example in the calculator and change any input.

Formula

\(P_h = \rho g Q H, \quad P_e = \frac{P_h}{\eta_p \eta_m}, \quad E = P_e\, t\)

Variables

Symbol Meaning SI unit
\(Q\) Flow m³/s
\(H\) Total head m
\(\rho\) Liquid density kg/m³
\(\eta_p\) Pump efficiency -
\(\eta_m\) Motor (and drive) efficiency -
\(t\) Running hours in a year s
\(c\) Electricity price per kWh (your currency) -
\(P_h\) Hydraulic power ρ g Q H W
\(P_e\) Electrical input W
\(\eta_{ww}\) Wire-to-water efficiency -
\(E\) Energy in a year J
\(C\) Cost in a year -
\(e_v\) Energy per volume pumped J/m³

Method and standards

Energy balance.

Where it is used

  • Pump energy audits.
  • Comparing pump replacements.

Common mistakes

  • Using rated rather than actual duty.
  • Forgetting drive losses.

Assumptions and limits

  • Steady duty.

References

  • P = ρ g Q H / (η_p η_m)

Questions and answers

150 m³/h at 40 m for 6000 h at 8 per kWh?

Hydraulic 16.3 kW, input 23.4 kW, about 1,122,528 a year.

What is wire-to-water efficiency?

Pump × motor × drive efficiency: hydraulic power out per electrical power in.

Why kWh per m³?

It lets you compare pumping systems and track deterioration.

Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.