Worked example
Example: Summer batch, no ice. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Aggregate mass (dry) | 1,850.0 kg |
| Aggregate temperature | 35.000 °C |
| Cement mass | 350.00 kg |
| Cement temperature | 50.000 °C |
| Mixing water mass (excluding ice) | 140.00 kg |
| Mixing water temperature | 15.000 °C |
| Free water on aggregates | 40.000 kg |
| Ice replacing part of the mixing water | 0 kg |
Applying the formula below gives:
| Result | Value |
|---|---|
| Fresh concrete temperature | 32.523 °C |
| Cooling from melting the ice (latent term only) | 0 K |
Open this example in the calculator and change any input.
Formula
\(T = \frac{0.22(T_aW_a + T_cW_c) + T_wW_w + T_aW_{wa} - 80W_i}{0.22(W_a + W_c) + W_w + W_{wa} + W_i}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(W_a\) | Aggregate mass (dry) | kg |
| \(T_a\) | Aggregate temperature | K |
| \(W_c\) | Cement mass | kg |
| \(T_c\) | Cement temperature | K |
| \(W_w\) | Mixing water mass (excluding ice) | kg |
| \(T_w\) | Mixing water temperature | K |
| \(W_{wa}\) | Free water on aggregates | kg |
| \(W_i\) | Ice replacing part of the mixing water | kg |
| \(T\) | Fresh concrete temperature | K |
| \(\Delta T_{ice}\) | Cooling from melting the ice (latent term only) | K |
Method and standards
Heat balance (°C, kg).
Where it is used
- Hot-weather concreting in Indian summers.
- Mass concrete for foundations.
Common mistakes
- Forgetting aggregate free water.
- Counting ice also as mixing water.
Assumptions and limits
- Ice at 0 °C, fully melted; a result below 0 °C (ice cannot all melt) is flagged.
- ΔT_ice is the latent term 80 W_i over the heat-capacity sum: the cooling against the same batch with the ice's melt water at 0 °C, not against the ice replaced by mixing water at T_w.
References
- ACI 305R (hot weather concreting) fresh concrete temperature equation
Questions and answers
Which ingredient matters most?
Aggregates, because of their mass; cooling them (shade, sprinkling) or the water gives the biggest effect per rupee.
How much does ice help?
Each kilogram of ice absorbs 80 kcal melting, roughly four to five times chilled water's effect.
What do the defaults represent?
A 1 m³ batch with sun-warmed aggregate and cement and cool mixing water, no ice.
Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.