FireCADCalc

Fineness Modulus of Aggregate from a Sieve Analysis

Fineness modulus of fine or coarse aggregate from the mass retained on the standard sieves, with the cumulative percentages retained and passing.

Inputs

Examples: Fine-medium sand (kg)Coarse sandFine sand

Results

Uses the 10 mm to 150 µm sieves for sand; the pan is not counted.

Total mass1,000.0g
Fineness modulus (sum of cumulative % retained / 100)2.2800
Passing 600 µm62.000%

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: Fine-medium sand (kg). The inputs, in the units selected above:

InputValue
Mass retained on 10 mm (all coarser material counted here as one sieve)0 g
Mass retained on 4.75 mm20.000 g
Mass retained on 2.36 mm60.000 g
Mass retained on 1.18 mm100.00 g
Mass retained on 600 µm200.00 g
Mass retained on 300 µm320.00 g
Mass retained on 150 µm220.00 g
Mass retained on the pan80.000 g

Applying the formula below gives:

ResultValue
Total mass1,000.0 g
Fineness modulus (sum of cumulative % retained / 100)2.2800
Passing 600 µm62.000 %

Open this example in the calculator and change any input.

Formula

\(FM = \frac{1}{100}\sum_{\text{sieves}} \text{cumulative \% retained}\)

Variables

Symbol Meaning SI unit
\(m_{1}\) Mass retained on 10 mm (all coarser material counted here as one sieve) kg
\(m_{2}\) Mass retained on 4.75 mm kg
\(m_{3}\) Mass retained on 2.36 mm kg
\(m_{4}\) Mass retained on 1.18 mm kg
\(m_{5}\) Mass retained on 600 µm kg
\(m_{6}\) Mass retained on 300 µm kg
\(m_{7}\) Mass retained on 150 µm kg
\(m_{8}\) Mass retained on the pan kg
\(M\) Total mass kg
\(FM\) Fineness modulus (sum of cumulative % retained / 100) -
\(P_{600}\) Passing 600 µm -

Method and standards

Definition.

Where it is used

  • Aggregate acceptance.
  • Mix design input.

Common mistakes

  • Counting the pan.
  • Using % retained instead of cumulative.

Assumptions and limits

  • Standard sieve series 10 mm to 150 µm (IS sizes; the ASTM series uses 9.5 mm in place of 10 mm).
  • Material on the 10 mm sieve is counted once; for coarse aggregate the larger standard sieves (80, 40, 20 mm) each add their cumulative percentage and must be added by hand.

References

  • Fineness modulus as the sum of cumulative percentages retained on the standard sieves divided by 100 (ASTM C125 definition; IS 383 sieve series with 10 mm, where the ASTM series uses 9.5 mm)

Questions and answers

What FM do the default masses give?

2.28, a fairly fine sand.

What does FM mean?

A single number for grading: higher means coarser.

Is it enough to describe grading?

No; very different gradings can share an FM. Check the zone limits too.

Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.