FireCADCalc

Water–Cement Ratio and Cement Content of a Mix

Water–cement ratio, cement content per cubic metre and free water from the batch quantities of cement, water and aggregates, with the yield of the batch.

Inputs

Examples: One bag, w/c 0.45Lean mix, w/c 0.6Rich mix, w/c 0.38

Results

Free water excludes water absorbed by the aggregates; correct the batch for aggregate moisture separately.

Water–cement ratio0.45000
Mass of the batch372.50kg
Yield (volume of concrete)0.15521m³
Cement content per m³322.15kg/m³
Water content per m³144.97kg/m³

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: One bag, w/c 0.45. The inputs, in the units selected above:

InputValue
Cement in the batch50.000 kg
Free water in the batch22.500 kg
Fine aggregate (saturated surface dry)110.00 kg
Coarse aggregate (SSD)190.00 kg
Fresh concrete density2,400.0 kg/m³

Applying the formula below gives:

ResultValue
Water–cement ratio0.45000
Mass of the batch372.50 kg
Yield (volume of concrete)0.15521 m³
Cement content per m³322.15 kg/m³
Water content per m³144.97 kg/m³

Open this example in the calculator and change any input.

Formula

\(\frac{w}{c} = \frac{W}{C}, \quad Y = \frac{C + W + F + G}{\rho_c}, \quad c_c = \frac{C}{Y}\)

Variables

Symbol Meaning SI unit
\(C\) Cement in the batch kg
\(W\) Free water in the batch kg
\(F\) Fine aggregate (saturated surface dry) kg
\(G\) Coarse aggregate (SSD) kg
\(\rho_c\) Fresh concrete density kg/m³
\(w/c\) Water–cement ratio -
\(m\) Mass of the batch kg
\(Y\) Yield (volume of concrete) m³
\(c_c\) Cement content per m³ kg/m³
\(w_c\) Water content per m³ kg/m³

Method and standards

Mass balance.

Where it is used

  • Site mix checks.
  • Cube test records.

Common mistakes

  • Total instead of free water.
  • Aggregates not SSD.

Assumptions and limits

  • Saturated surface dry aggregates.

References

  • Batch mass balance; yield = batch mass / fresh density (ACI 211.1 terminology)

Questions and answers

One 50 kg bag with 22.5 kg water?

w/c = 0.45; the default batch makes about 0.155 m³ at 322 kg of cement per m³.

Why does w/c matter?

Strength and durability fall as w/c rises.

What is yield?

The concrete volume a batch makes.

Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.