Worked example
Example: Small frame. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Column width | 0.30000 m |
| Column depth | 0.45000 m |
| Column height | 3.0000 m |
| Number of columns | 12.000 - |
| Beam width (soffit) | 0.23000 m |
| Beam depth below the slab (sides) | 0.33000 m |
| Total beam length (clear spans) | 90.000 m |
| Slab soffit area (less beam soffits) | 160.00 m² |
| Slab edge length | 56.000 m |
| Slab thickness | 0.15000 m |
Applying the formula below gives:
| Result | Value |
|---|---|
| Columns (four sides) | 54.000 m² |
| Beams (soffit and two sides) | 80.100 m² |
| Slab soffit and edges | 168.40 m² |
| Total formwork area | 302.50 m² |
Open this example in the calculator and change any input.
Formula
\(A_c = 2(b_c + d_c) h_c n_c, \quad A_b = (b_b + 2 d_b) L_b, \quad A_{sl} = A_s + P_s t_s\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(b_c\) | Column width | m |
| \(d_c\) | Column depth | m |
| \(h_c\) | Column height | m |
| \(n_c\) | Number of columns | - |
| \(b_b\) | Beam width (soffit) | m |
| \(d_b\) | Beam depth below the slab (sides) | m |
| \(L_b\) | Total beam length (clear spans) | m |
| \(A_s\) | Slab soffit area (less beam soffits) | m² |
| \(P_s\) | Slab edge length | m |
| \(t_s\) | Slab thickness | m |
| \(A_c\) | Columns (four sides) | m² |
| \(A_b\) | Beams (soffit and two sides) | m² |
| \(A_{sl}\) | Slab soffit and edges | m² |
| \(A\) | Total formwork area | m² |
Method and standards
Contact areas.
Where it is used
- Formwork hire and labour estimates.
- Bills of quantities.
Common mistakes
- Counting beam sides within the slab.
- Using centre-line spans.
Assumptions and limits
- Rectangular members.
References
- Contact area of formwork (Common site practice (quantity estimating))
Questions and answers
Twelve 300 × 450 columns, 3 m high?
54 m² of column formwork.
Beams?
Soffit plus two sides below the slab, over the clear spans.
Is footing formwork included?
Add footing sides separately if they are shuttered.
Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.