Worked example
Example: Synthesis gas 3:1. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Total mass flow | 5,000.0 kg/h |
| Component 1: mole fraction | 75.000 % |
| Component 1: molar mass | 2.0159 kg/kmol |
| Component 2: mole fraction | 25.000 % |
| Component 2: molar mass | 28.013 kg/kmol |
| Component 3: mole fraction | 0 % |
| Component 3: molar mass | 17.031 kg/kmol |
| Component 4: mole fraction | 0 % |
| Component 4: molar mass | 39.948 kg/kmol |
Applying the formula below gives:
| Result | Value |
|---|---|
| Mean molar mass | 8.5153 kg/kmol |
| Total molar flow | 587.18 kmol/h |
| Component 1: molar flow | 440.39 kmol/h |
| Component 1: mass flow | 887.77 kg/h |
| Component 2: molar flow | 146.80 kmol/h |
| Component 2: mass flow | 4,112.2 kg/h |
| Component 3: molar flow | 0 kmol/h |
| Component 3: mass flow | 0 kg/h |
| Component 4: molar flow | 0 kmol/h |
| Component 4: mass flow | 0 kg/h |
Open this example in the calculator and change any input.
Formula
\(\bar M = \sum y_i M_i, \quad \dot n = \frac{\dot m}{\bar M}, \quad \dot n_i = y_i \dot n, \quad \dot m_i = \dot n_i M_i\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(\dot m\) | Total mass flow | kg/s |
| \(y_{1}\) | Component 1: mole fraction | - |
| \(M_{1}\) | Component 1: molar mass | kg/kmol |
| \(y_{2}\) | Component 2: mole fraction | - |
| \(M_{2}\) | Component 2: molar mass | kg/kmol |
| \(y_{3}\) | Component 3: mole fraction | - |
| \(M_{3}\) | Component 3: molar mass | kg/kmol |
| \(y_{4}\) | Component 4: mole fraction | - |
| \(M_{4}\) | Component 4: molar mass | kg/kmol |
| \(\bar M\) | Mean molar mass | kg/kmol |
| \(\dot n\) | Total molar flow | mol/s |
| \(\dot n_{1}\) | Component 1: molar flow | mol/s |
| \(\dot m_{1}\) | Component 1: mass flow | kg/s |
| \(\dot n_{2}\) | Component 2: molar flow | mol/s |
| \(\dot m_{2}\) | Component 2: mass flow | kg/s |
| \(\dot n_{3}\) | Component 3: molar flow | mol/s |
| \(\dot m_{3}\) | Component 3: mass flow | kg/s |
| \(\dot n_{4}\) | Component 4: molar flow | mol/s |
| \(\dot m_{4}\) | Component 4: mass flow | kg/s |
Method and standards
Definitions.
Where it is used
- Reactor and synthesis loop balances.
- Gas handling equipment.
Common mistakes
- kg/kmol vs g/mol scaling.
- Mass fractions entered as mole fractions.
Assumptions and limits
- Up to four components.
References
- ṅ = ṁ/M̄
- M̄ = Σ y_i M_i
Questions and answers
5000 kg/h of 3:1 hydrogen–nitrogen?
Mean molar mass about 8.5: roughly 587 kmol/h, of which 440 kmol/h hydrogen.
Why molar flows?
Reactions and gas laws work in moles.
Mass fractions instead?
Convert them first with the mass ↔ mole calculator.
Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.